Installing The M320 Without A Mechanical Lift; Lift; Removing M320 Components From The Chassis - Juniper M320 Hardware Manual

CHAPTER 18
Installing the M320 Without a Mechanical

Lift

Tools and Parts Required to Install the M320 Chassis Without a Mechanical Lift
Related
Documentation

Removing M320 Components from the Chassis

Copyright © 2015, Juniper Networks, Inc.
Tools and Parts Required to Install the M320 Chassis Without a Mechanical
Lift on page 143
Removing M320 Components from the Chassis on page 143
Installing the M320 Chassis in the Rack Manually on page 151
Reinstalling M320 Components in the Chassis on page 153
Installing the M320 Cable Guards on page 159
To install the chassis, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
7/16-in. (11 mm) socket wrench for the DC power supply
3/8-in. nut driver for the cable management system
ESD grounding wrist strap
M320 Site Preparation Checklist Requirements on page 85
Removing M320 Components from the Chassis on page 143
Removing the M320 Power Supplies on page 144
Removing the M320 SIBs on page 145
Removing the M320 CBs on page 146
Removing the M320 Rear Fan Tray on page 146
Removing the M320 Cable Management System on page 148
Removing the M320 Front Fan Trays on page 148
Removing the M320 FPCs on page 149
143