Juniper M320 Hardware Manual page 299

Action
user@host> show chassis fpc
Temp
Slot State (C)
0 Online 37
1 Empty
2 Online 37
3 Empty
4 Empty
5 Empty
6 Empty
7 Empty
user@host> show chassis fpc detail 0
Slot 0 information:
State
Temperature
Total CPU DRAM
Total SRAM
Total SDRAM
Start time:
Uptime:
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
On a regular basis:
Check the LCD on the craft interface and the LEDs on the craft interface directly above
each FPC slot. The green LED labeled
normally.
During normal operation:
The green LED above the FPC on the craft interface lights steadily when the FPC
OK
is online and functioning normally.
The green OK LED blinks during startup.
Issue the CLI
show chassis fpc
shown in the sample output, the value
that the FPC is functioning normally:
CPU Utilization (%)
Total Interrupt
2 0
3 0
For more detailed output, add the
a slot number ( ), which is optional:
0
Online
37 degrees C / 98 degrees F
256 MB
28 MB
256 MB
2003-10-01 04:19:30 PDT
10 days, 7 hours, 16 minutes, 48 seconds
For further description of the output from the commands, see the
M320 Chassis Description on page 7
M320 Flexible PIC Concentrator (FPC) Description on page 49
M320 Craft Interface FPC LEDs and Online/Offline Buttons on page 18
Troubleshooting the M320 FPCs on page 289
Replacing an M320 FPC on page 227
Chapter 31: Maintaining Components and Cables
lights steadily when an FPC is functioning
OK
command to check the status of installed FPCs. As
in the column labeled
Online
Memory Utilization (%)
DRAM (MB) Heap Buffer
256 9 41
256 8 41
option. The following example also specifies
detail
indicates
State
.
CLI Explorer
271