M320 Sib Leds; Table 53: Sib Leds - Juniper M320 Hardware Manual

Table 52: Performance per SIB/FPC Configuration (continued)
Number of Active
SIBs FPC Type and Number of PICs per FPC
3 FPC1 with up to four PICs
FPC2 with up to four PICs
FPC3 with two PICs
4 FPC1 with up to four PICs
FPC2 with up to four PICs
FPC3 with up to two PICs
Related
Documentation

M320 SIB LEDs

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Replacing an M320 SIB on page 259
Maintaining the M320 SIBs on page 279
Table 53 on page 81 describes the functions of the SIB LEDs. If all three LEDs are off, the
SIB is not receiving power. The

Table 53: SIB LEDs

Label Color
Green
ACTIVE
Green
OK
Yellow
FAIL
M320 SIB Description on page 79
Replacing an M320 SIB on page 259
Maintaining the M320 SIBs on page 279
Chapter 8: Switch Fabric Components and Descriptions
Performance
Line rate
Line rate
Line rate not guaranteed
Line rate
Line rate
Line rate
and LEDs are replicated on the craft interface.
OK FAIL
State Description
On steadily SIB is in active mode.
On steadily SIB is functioning normally.
Blinking SIB is starting up.
On steadily SIB has failed.
81