Ford 2003 Mustang Workshop Manual page 2336

P0756 SSB Shift solenoid
B functional
failure
P1715 SSB SSB
malfunction
P0758 SSB, wiring, SSB electrical
PCM circuit failure
P0782 SSA, SSB or 2-3 shift error
b
internal
parts
P0783 SSA, SSB or 3-4 shift error
b
internal
parts
P1116 ECT ECT out of on-
board
diagnostic
range
P1124 TP TP voltage
high/low for
on-board
diagnostic
drop across on condition mode
solenoid. Circuit and manual lever
open or shorted or position. See
PCM driver failure Solenoid On/Off
during on-board Chart.
diagnostic.
Mechanical or Incorrect gear
hydraulic failure of selection depending
the shift solenoid. on failure mode and
manual lever
position.
Mechanical failure Incorrect gear
of the solenoid selection depending
detected. on condition, mode
and manual lever
position. See
Solenoid Operation
Chart.
SSB circuit fails to Incorrect gear
provide voltage depending on
drop across condition mode and
solenoid. Circuit manual lever
open or shorted or position. See
PCM driver failure Solenoid Off/On
during on-board Chart. Flashing
diagnostic. Transmission
Control Indicator
Lamp (TCIL).
Engine rpm drop Incorrect gear
not detected when selection depending
2-3 shift was on failure or mode
commanded by and manual lever
PCM. position. Shift errors
may also be due to
other internal
transmission
concerns (stuck
valves, damaged
friction material).
Engine rpm drop Incorrect gear
not detected when selection depending
3-4 shift was on failure or mode
commanded by and manual lever
PCM. position. Shift errors
may also be due to
other internal
transmission
concerns (stuck
valves, damaged
friction material).
ECT temperature Rerun on-board
higher or lower diagnostic at
than expected normal operating
during KOEO and temperature.
KOER.
TP was not in the Rerun at
correct position for appropriate throttle
on-board position per
diagnostic. application.
REFER to Solenoid
Operation Chart.
Go To Pinpoint
Test A .
Go To Pinpoint
Test F .
Go To Pinpoint
Test A .
REFER to Solenoid
Operation Chart.
Go To Pinpoint
Test A .
REFER to Solenoid
Operation Chart.
Go To Pinpoint
Test A .
REFER to the
Powertrain
Control/Emissions
Diagnosis (PC/ED)
manual.
REFER to the
Powertrain
Control/Emissions
Diagnosis (PC/ED)