Ford 2003 Mustang Workshop Manual page 2541

SECTION 307-01: Automatic Transaxle/Transmission
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Torque Converter Leak Check
Special Tool(s)
Leak Tester, Torque Converter
307-421
1. Clean the outside surface of the torque converter.
2. Install the special tool into the converter hub.
3. WARNING: Always follow correct safety procedures while using press. Failure to
follow these instructions may result in personal injury.
Install the torque converter with the installed special tool into the arbor press.
Secure the press, apply enough force to seal the tool into the torque converter.
4. NOTE: Use clean dry shop air.
Apply air pressure to the valve on the special tool.
2003 Mustang Workshop Manual