Ford 2003 Mustang Workshop Manual page 1900

SECTION 303-03B: Supercharger Cooling
DIAGNOSIS AND TESTING
Supercharger Cooling
Special Tool(s)
Material
Item
Motorcraft Premium
Engine Coolant
VC-4-A (in Oregon
VC-5, in Canada
CXC-10)
Motorcraft Premium
Gold Engine Coolant
VC-7-A
Motorcraft Cooling
System Stop Leak
Pellets
VC-6 or equivalent
Inspection and Verification
WARNING: Never remove the pressure relief cap while the engine is operating or when the
cooling system is hot. Failure to follow these instructions can result in damage to the cooling
system or engine or personal injury. To avoid having scalding hot coolant or steam blow out of
the degas bottle when removing the pressure relief cap, wait until the engine has cooled, then
wrap a thick cloth around the pressure relief cap and turn it slowly. Step back while the
pressure is released from the cooling system. When you are sure all the pressure has been
released, (still with a cloth) turn and remove the pressure relief cap.
CAUTION: Check the coolant and engine oil levels. Top off the coolant level if needed. If
there is engine coolant in the engine oil, the cause must be corrected and the oil changed or
major component damage can occur.
Pressure Test Kit
014-R1072 or equivalent
Battery/Antifreeze Tester
014-R1060 or equivalent
Specification
ESE-M97B44-A
WSS-M97B51-A1
ESE-M99B37-5 except as
noted in ES-F65E-19A511-
AA
2003 Mustang Workshop Manual