Ford 2003 Mustang Workshop Manual page 2179

SECTION 303-13: Evaporative Emissions
REMOVAL AND INSTALLATION
Evaporative Emission Canister
Removal and Installation
1. WARNING: The evaporative emission system contains fuel vapor and condensed
fuel vapor. Although not in large quantities, it still presents the danger of explosion or
fire. Disconnect the battery ground cable from the battery to minimize the possibility of
an electrical spark occurring, possibly causing a fire or explosion if fuel vapor or liquid
fuel is present in the area. Failure to follow these instructions may result in personal
injury.
Disconnect the battery ground cable. For additional information, refer to
2. Raise and support the vehicle. For additional information, refer to
3. Remove the left rear wheel. For additional information, refer to
4. WARNING: Do not smoke or carry lighted tobacco or open flame of any type when
working on or around any fuel-related component. Highly flammable mixtures are always
present and may be ignited. Failure to follow these instructions may result in personal
injury.
Disconnect the canister vent solenoid hose assembly.
5. Disconnect the connector.
6. Disconnect the evaporative emission (EVAP) canister purge outlet tube.
2003 Mustang Workshop Manual
Section 414-01
Section 100-02 .
Section 204-04 .
.