Ford 2003 Mustang Workshop Manual page 2096

SECTION 303-08: Engine Emission Control
REMOVAL AND INSTALLATION
Exhaust Gas Recirculation (EGR) Valve —Cobra
Removal and Installation
1. Disconnect the accelerator cable and the speed control cable.
2. Remove the accelerator cable bracket bolts.
3. Release the clip and position the accelerator cable bracket and the cables aside.
4. Disconnect the electrical connectors from the fuel pulse damper, EGR vacuum regulator
solenoid, supercharger bypass vacuum solenoid, and the differential pressure feedback EGR
system.
2003 Mustang Workshop Manual