Ford 2003 Mustang Workshop Manual page 1875

SECTION 303-03A: Engine Cooling
REMOVAL AND INSTALLATION
Bypass Tube —Cobra
Material
Item
Motorcraft Premium Gold
Engine Coolant
VC-7-A (in Oregon VC-7-B)
(yellow color)
Removal and Installation
1. Drain the engine coolant. For additional information, refer to
and Bleeding in this section.
2. Disconnect the radiator upper hose and the radiator lower hose.
3. Remove the supercharger belt. For additional information, refer to
4. Disconnect the engine coolant temperature sensor electrical connector and unclip the wiring
harness from the stud.
5. NOTE: LH is shown, RH is similar.
Remove the coolant bypass nuts.
Specification
WSS-M97B51-
A1
2003 Mustang Workshop Manual
Cooling System Draining, Filling
Section 303-05 .