Ford 2003 Mustang Workshop Manual page 1885

Hide thumbs Also See for 2003 Mustang:

Table of Contents

10. Remove the four bolts and the coolant pump.

11. If necessary, wipe the coolant pump mounting surface with a soft cloth.

CAUTION: Do not rotate the coolant pump housing once installed in the engine.

Damage to the O-ring seal can occur, causing the coolant pump to leak.

NOTE: Install a new O-ring seal and lubricate with the same clean engine coolant that is

present in the system. Do not mix coolant types.

To install, reverse the removal procedure.

Show Quick Links

Table of Contents