Ford 2003 Mustang Workshop Manual page 2600

SECTION 307-05: Automatic Transaxle/Transmission External Controls 2003 Mustang Workshop Manual
GENERAL PROCEDURES
Cable Adjustment
1. NOTE: Make sure that the range selector lever is tight against the rearward overdrive stop.
Place the transmission range selector lever in the overdrive position.
2. Raise and support the vehicle. For additional information, refer to
3. Loosen the manual control lever nut.
4. Place the transmission manual control lever in the overdrive position.
5. Tighten the nut on the manual control lever.
Section 100-02 .