Ford 2003 Mustang Workshop Manual page 2660

SECTION 308-01: Clutch
REMOVAL AND INSTALLATION
Disc and Pressure Plate —3.8L and 4.6L (2V) Engines
Special Tool(s)
Material
Item
Premium Long Life Grease
XG-1-C
1. Remove the transmission. For additional information, refer to
Section 308-03B
2. CAUTION: Loosen the bolts evenly to prevent clutch pressure plate damage.
NOTE: If the parts are to be reused, mark the clutch pressure plate and the flywheel.
Remove the bolts and remove the clutch pressure plate and the clutch disc.
Installation
NOTE: Clean the clutch pressure plate and flywheel with a commercial alcohol-based solvent so
surfaces are free from oil film.
Do not use cleaners with a petroleum base. Do not immerse the clutch pressure plate in the solvent.
1. Position the clutch disc on the flywheel.
Using the special tool, align the clutch disc.
Clutch Aligner
308-020 (T74P-7137-K)
Specification
ESA-M1C75-B
(TR3650).
2003 Mustang Workshop Manual
Section 308-03A (T5OD) or