Ford 2003 Mustang Workshop Manual page 1891

SECTION 303-03A: Engine Cooling
REMOVAL AND INSTALLATION
Cooling Fan Motor and Shroud
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the degas bottle or coolant expansion tank. For additional information, refer to
Bottle—4.6L(2V) and 4.6L(4V)
3. Disconnect the cooling fan electrical connector.
4. Separate the fan harness from the shroud.
5. Remove the LH bolt.
6. Remove the RH bolt.
in this section.
2003 Mustang Workshop Manual
Degas