SECTION 308-01: Clutch
REMOVAL AND INSTALLATION
Pilot Bearing
Special Tool(s)
1. Remove the clutch disc and the clutch pressure plate. For additional information, refer to
and Pressure Plate—3.8L and 4.6L (2V) Engines
in this section.
2. Using the special tool, remove the pilot bearing from the flywheel.
Installation
1. Insert the pilot bearing into the crankshaft.
2. Install the clutch disc and the clutch pressure plate. For additional information, refer to
Pressure Plate—3.8L and 4.6L (2V) Engines
this section.
Puller with Slide Hammer
308-001 (T58L-101-B)
2003 Mustang Workshop Manual
or
Disc and Pressure Plate—4.6L (4V) Engine
or
Disc and Pressure Plate—4.6L (4V) Engine
Disc
Disc and
in