SECTION 308-03B: Manual Transaxle/Transmission — TR3650
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Input Shaft and Bearing
Special Tool(s)
Remover, Driver Pinion
Bearing Cone
205-D002 (D79L-4621-A) or
equivalent
Installer, Drive Pinion Bearing
Cone
205-011 (T57L-4621-B)
Remover/Installer, Bearing
Tube
308-024 (T75L-7025-B)
Disassembly and Assembly
1. Disassemble the input shaft.
1. Remove the third/fourth synchronizer blocking ring.
2. Remove the input shaft thrust washer.
3. Remove the input shaft thrust bearing.
4. Remove the input shaft pocket bearing.
Inspect all components for wear or damage. Install new components as necessary.
2003 Mustang Workshop Manual