Ford 2003 Mustang Workshop Manual page 2726

SECTION 308-03A: Manual Transaxle/Transmission — T5OD
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Output Shaft
Special Tool(s)
Pinion Bearing Cone Remove
205-D002 (D79L-4621-A) or
Equivalent
Spiral Snap Ring Replacer
308-096 (T85P-7025-A)
Disassembly
1. Using the special tool and a press, remove the third/fourth gear synchronizer assembly (7124),
the third speed synchronizer blocking ring (7107), and the third gear (7B340) as an assembly.
2. Remove the third speed bearing (7B369) and the third speed gear bearing spacer (7B320).
3. Remove the snap ring.
2003 Mustang Workshop Manual