Ford 2003 Mustang Workshop Manual page 1880

SECTION 303-03A: Engine Cooling
REMOVAL AND INSTALLATION
Water Pump —3.8L
Material
Item
Motorcraft Premium Gold
Engine Coolant
VC-7-A (in Oregon VC-7-B)
(yellow color)
Removal and Installation
1. Drain the engine coolant. For additional information, refer to
and Bleeding in this section.
2. Loosen the coolant pump pulley bolts.
3. Remove the power steering (PS) pump pulley. For additional information, refer to
02 .
4. Remove the bolts and the coolant pump pulley.
5. Remove the PS bracket.
Remove the bolts.
Remove the nuts.
6. Disconnect the lower radiator hose from the coolant pump.
Specification
WSS-M97B51-
A1
2003 Mustang Workshop Manual
Cooling System Draining, Filling
Section 211-