SECTION 303-07C: Engine Ignition — 4.6L (4V)
REMOVAL AND INSTALLATION
Ignition Coil-On-Plug
Material
Item
Silicone Brake Caliper Grease
and Dielectric Compound
D7AZ-19A331-A or equivalent
Removal and Installation
1. Disconnect the battery ground cable. For additional information, refer to
2. Remove the air cleaner outlet pipe. For additional information, refer to
3. Remove the RH ignition coil cover bolts and the cover.
4. Remove the ignition coils.
1. Disconnect the electrical connectors.
2. Remove the ignition coils.
Specification
ESE-M1C171-
A
2003 Mustang Workshop Manual
Section 414-01
Section 303-12
.
.