SECTION 307-01: Automatic Transaxle/Transmission
IN-VEHICLE REPAIR
Transmission Support Crossmember
Removal and Installation
1. Raise and support the vehicle. For additional information, refer to
2. Support the transmission with a suitable transmission jack.
3. Remove the crossmember.
1. Disconnect the HO2S sensors and position them aside.
2. Remove the bolts from the crossmember to the extension housing.
3. Remove the bolts from the crossmember to the body and remove the crossmember.
4. To install, reverse the removal procedure.
2003 Mustang Workshop Manual
Section 100-02
.