Ford 2003 Mustang Workshop Manual page 2409

Shift Linkage, Digital TR Sensor
· Damaged or incorrectly adjusted
Park Mechanism
· Output shaft ring, parking brake pawl,
parking pawl return spring, park rod
guide cup, parking pawl shaft,
parking pawl actuating rod, manual
lever detent spring damaged or
assembled incorrectly
Other Concerns: Overheating
Possible Component
257 — ELECTRICAL ROUTINE
Refer to Routine 240/340, Torque Converter Operation Concern: No Apply
357 — HYDRAULIC/MECHANICAL ROUTINE
Fluid
· Incorrect level
· Condition
Other
· Damaged, blocked or reversed cooler lines or
restriction in the transmission oil cooler
Vehicle Concerns Causing Engine Overheating
Main Controls
· Drain back valve, torque clutch control valve, converter
limit valve stuck, damaged or assembled incorrectly
Torque Converter Clutch
· No apply
· Inspect and repair as required. Verify transmission shift
cable adjustment; refer to
transmission shift cable as necessary. After repairing
transmission shift cable, verify that the digital TR sensor
is correctly adjusted. Adjust the digital TR sensor as
necessary.
· Inspect for damage or incorrect assembly and repair as
required.
· Adjust fluid to correct level.
· Inspect condition of fluid.
· Inspect for damage and correct
installation. Repair as required.
· Refer to the appropriate engine
cooling section.
· Inspect for damage and repair as
required.
· Refer to Routine 240/340.
Section 307-05 . Adjust
Reference/Action