Ford 2003 Mustang Workshop Manual page 2451

SECTION 307-01: Automatic Transaxle/Transmission
IN-VEHICLE REPAIR
Reverse Servo Assembly
Special Tool(s)
Dial Indicator Gauge with
Holding Fixture
100-002 (TOOL-4201-C)
Remover/Installer, Servo
Piston
307-251 (T92P-70023-A)
Installer, Servo Piston
307-073 (T80L-77030-A)
Removal
1. Remove the main control valve body. For additional information, refer to
Body in this section.
2. Using the special tool, remove the reverse band servo retaining ring.
1. Compress the servo spring.
2. Remove the reverse band servo retaining ring.
3. Remove the reverse servo assembly.
1. Remove the reverse band servo cover.
2. Remove the reverse band servo piston and rod.
3. Remove the reverse band servo spring.
2003 Mustang Workshop Manual
Main Control Valve