Ford 2003 Mustang Workshop Manual page 1957

SECTION 303-04B: Fuel Charging and Controls — 4.6L (2V)
REMOVAL AND INSTALLATION
Fuel Injection Supply Manifold
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when
working on or near any fuel related components. Highly flammable mixtures are always present
and may be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is
not running. Before working on or disconnecting any of the fuel lines or fuel system
components, the fuel pressure must be relieved. Failure to follow these instructions may result
in personal injury.
1. Disconnect the battery ground cable (14301). For additional information, refer to
01 .
2. Disconnect the air cleaner outlet tube. For additional information, refer to
3. Relieve the fuel pressure. For additional information, refer to
4. Disconnect the fuel line. For additional information, refer to
5. Remove the throttle body (9E926). For additional information, refer to
section.
6. Remove the idle air control (IAC) hose and position it out of the way.
7. Remove the positive crankshaft ventilation (PCV) hose.
2003 Mustang Workshop Manual
Section 414-
Section 303-12
Section 310-00 .
Section 310-00 .
Throttle Body
.
in this