Ford 2003 Mustang Workshop Manual page 1989

SECTION 303-04D: Fuel Charging and Controls — Mach I 4.6L (4V)
REMOVAL AND INSTALLATION
Throttle Body
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when
working on or near any fuel related components. Highly flammable mixtures are always present
and can ignite. Failure to follow these instructions can result in personal injury.
CAUTION: The throttle body bore and plate area have a special coating and cannot be
cleaned.
1. Remove the air intake scoop bracket. For additional information, refer to
2. Remove the air cleaner outlet tube. For additional information, refer to
3. Disconnect the throttle position (TP) sensor electrical connector.
4. Disconnect the accelerator controls.
Disconnect the accelerator cable.
Disconnect the speed control cable.
Disconnect the return spring.
5. NOTE: Discard the throttle body gasket after removing the throttle body.
Remove the throttle body.
Remove the four bolts.
2003 Mustang Workshop Manual
Section 303-12
Section 303-12
.
.