SECTION 308-03A: Manual Transaxle/Transmission — T5OD
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Input Shaft and Bearing
Special Tool(s)
Input Shaft Seal Replacer
308-220 (T94P-7025-AH)
Pinion Bearing Cone Remover
205-D002 (D79L-4621-A) or
Equivalent
Disassembly
1. Using the special tool and a press, remove the input bearing (7025).
2. Remove the bearing race and the end play selective shims.
3. Remove the input shaft seal (7052).
Assembly
2003 Mustang Workshop Manual