SECTION 303-12: Intake Air Distribution and Filtering
REMOVAL AND INSTALLATION
Air Intake Scoop Bracket
Removal and Installation
1. Remove the air intake scoop. For additional information, refer to
2. Remove the air intake scoop bracket nut at the throttle body.
3. Remove the exhaust gas recirculation (EGR) vacuum regulator solenoid bolts and position the
EGR vacuum regulator solenoid aside.
4. Remove the air intake scoop bracket nuts and the air intake scoop bracket bolt and remove the
air intake scoop bracket from the engine.
5. To install, reverse the removal procedure.
2003 Mustang Workshop Manual
Air Intake Scoop
in this section.