Ford 2003 Mustang Workshop Manual page 2569

52. Install the 2-3 accumulator assembly.
1. Install the accumulator piston.
2. Install the accumulator piston spring.
3. Install the accumulator spring retainer.
53. Using the special tools apply regulated air pressure to the test ports. Verify that the components
are applied and released.
54. NOTE: The tab on the electrical connector is secured by main control valve body.
Install the electrical connector into the case.
55. NOTE: The alignment bolts are valve body assembly bolts and are in the valve body.
Align the main control valve body alignment bolts and position the main control valve body.