Ford 2003 Mustang Workshop Manual page 2208

SECTION 303-14: Electronic Engine Controls
REMOVAL AND INSTALLATION
Crankshaft Position (CKP) Sensor —4.6L
Removal
1. Disconnect the battery ground cable. For additional information, refer to
2. Remove the A/C compressor. For additional information, refer to
3. Remove the crankshaft position (CKP) sensor.
Disconnect the connector.
Remove the bolt and remove the sensor.
Installation
1. To install, reverse the removal procedure.
2003 Mustang Workshop Manual
Section 414-01
Section 412-03 .
.