12. NOTE: Before assembly, soak the new clutch discs in clean automatic transmission fluid for 15
minutes.
Install the clutch pack assembly.
1. Install the pressure ring.
2. Install the clutch pack.
3. Install the pressure plate.
13. Install the clutch pack retaining ring.
14. Install the special tool on the forward clutch pack.
Push downward on the clutch pack.
Release pressure and zero the dial indicator.
15. Using the special tool, check the clutch pack clearance.
1. Lift up on the clutch pack until it fully seats against the clutch pressure plate retainer.
2. Read the dial indicator.
If the clearance is not within specifications, install the correct size retaining ring.
Selective Retaining Ring
Specification