Ford 2003 Mustang Workshop Manual page 1878

Hide thumbs Also See for 2003 Mustang:

Table of Contents

6. Remove the bolts and the bypass tube.

7. NOTE: Do not cut the O-ring seal during tube installation into cylinder heads or engine coolant

leakage may occur.

NOTE: Wipe the O-ring sealing surface on the cylinder heads with a soft cloth, if necessary and

lubricate the O-ring seal. Use premium engine coolant.

To install, reverse the removal procedure

8. Fill the cooling system. For additional information, refer to

in this section.

Cooling System Draining, Filling and

Show Quick Links

Table of Contents