26. Using the special tool, measure end clearance for the No.1 front pump thrust washer.
1. Position the special tool on the pump case mounting surface.
2. Maintaining downward pressure, use a depth micrometer to measure end play clearance.
Use the No.1 thrust washer chart to select the correct washer.
No.1 Thrust Washer Chart
37.706-38.184 mm (1.485-1.503
inch)
38.185-38.641 mm (1.504-1.521
inch)
38.642-39.073 mm (1.522-1.538
inch)
39.074-39.505 mm (1.539-1.555
inch)
39.506-40.165 mm (1.556-1.581
inch)
27. Install the No.1 front pump support thrust washer.
Use petroleum jelly to hold the washer in place.
Depth
Thickness
1.270-1.372 mm (0.050-0.054
inch)
1.727-1.829 mm (0.068-0.072
inch)
2.159-2.261 mm (0.085-0.089
inch)
2.591-2.692 mm (0.102-0.106
inch)
3.023-3.124 mm (0.119-0.123
inch)
Color
Code
Green
Yellow
Natural
Red
Blue