Ford 2003 Mustang Workshop Manual page 2742

D8AZ-19554-A
Multi-Purpose Grease
D0AZ-19554-AA
Clear Silicone Rubber
D6AZ-19562-AA
Motorcraft Premium Long Life
Grease
XG-1-C
1. Soak the blocking rings in transmission fluid for ten minutes.
2. Position the countershaft cluster gear in the case.
3. CAUTION: Failure to correctly support the case during bearing installation will
result in permanent distortion of the case.
Using a the special tools and a press, install the rear countershaft bearing assembly.
1. Position two 6.35 mm (0.25 in) pieces of bar stock between the countershaft and the
case.
2. Using a the special tools and a press, install the rear countershaft bearing assembly.
A
ESB-M1C93-
B
ESB-M4G92-
A
ESA-M1C75-
B