Ford 2003 Mustang Workshop Manual page 1978

SECTION 303-04C: Fuel Charging and Controls — Cobra 4.6L (4V)
REMOVAL AND INSTALLATION
Fuel Injection Supply Manifold and Fuel Injector
Material
Item
SAE 5W-20 Premium Synthetic
Blend Motor Oil
XO-5W20-QSP
Removal and Installation
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when
working on or near any fuel related components. Highly flammable mixtures are always present
and can ignite. Failure to follow these instructions can result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is
not running. Before working on or disconnecting any of the fuel lines or fuel system
components, the fuel system pressure must be relieved. Failure to follow these instructions
can result in personal injury.
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet tube. For additional information, refer to
3. Release the fuel pressure. For additional information, refer to
4. Disconnect the fuel supply hose spring lock coupling. For additional information, refer to
310-00 .
5. Remove the exhaust gas recirculation (EGR) valve and the exhaust manifold-to-EGR valve
tube. For additional information, refer to
6. Remove the throttle body and spacer assembly.
7. Disconnect the vacuum hose.
Specification
WSS-M2C153-
H
Section 303-08
2003 Mustang Workshop Manual
Section 303-12
Section 310-00
.
.
.
Section