Ford 2003 Mustang Workshop Manual page 2843

SECTION 308-03B: Manual Transaxle/Transmission — TR3650
INSTALLATION
Transmission
Material
Item
Motorcraft MERCON® Multi-
Purpose (ATF) Transmission
Fluid
XT-2-QDX
Pipe Sealant with Teflon®
D8AZ-19554-A or equivalent
Premium Long Life Grease
XG-1-C, K or T or equivalent
1. NOTE: Before installing the transmission, the ball stud, clutch release lever and the input shaft
must be cleaned and lubricated. Use Motorcraft Premium Long-Life Grease XG-1-C or XG-1-K
or equivalent meeting Ford specification ESA-M1C75-B.
To install, reverse the removal procedure. For additional information, refer to
this section.
Check, and as necessary, fill the transmission with transmission fluid. The total fill
capacity is 3.6L (7.5 pt).
2. Apply sealant to the fill plug threads and install the fill plug.
Use pipe sealant with Teflon®.
Specification
MERCON
WSK-M2G350-
A2
ESA-M1C75-B
2003 Mustang Workshop Manual
Transmission in