Ford 2003 Mustang Workshop Manual page 1894

SECTION 303-03A: Engine Cooling
REMOVAL AND INSTALLATION
Degas Bottle —4.6L(2V) and 4.6L(4V)
Removal and Installation
1. Drain the engine coolant from the degas bottle only. For additional information, refer to
System Draining, Filling and Bleeding
2. Disconnect the radiator vent hose.
3. Remove the degas bottle return hose.
4. Remove the nuts and the degas bottle.
5. To install, reverse the removal procedure.
6. Fill and bleed the cooling system. For additional information, refer to
Filling and Bleeding
in this section.
in this section.
2003 Mustang Workshop Manual
Cooling System Draining,
Cooling