Ford 2003 Mustang Workshop Manual page 2781

SECTION 308-03B: Manual Transaxle/Transmission — TR3650
DISASSEMBLY
Transmission
Special Tool(s)
Remover, Mainshaft Bearing
308-058 (T77J-7025-H)
Screw, Bearing Removal tube
308-092 (T84T-7025-B)
Holding Fixture, Transmission
307-003 (T57L-500-B)
Remover, Bushing
307-001 (TOOL-1175-AC)
Remover/Installer, Bearing
Tube
308-024 (T75L-7025-B)
Disassembly
NOTE: During disassembly, if any roll pins, retaining rings or bearings are removed, install new
components. Install bearings and bearing cups as a set.
1. Remove the clutch release hub and bearing and the clutch release lever. For additional
information, refer to
2. WARNING: Make sure protective eye wear is in place.
Clean the transmission exterior with solvent and dry with compressed air. During disassembly,
clean all components with solvent and dry with compressed air.
3. Attach the transmission to the special tool.
Section 308-01 .
2003 Mustang Workshop Manual