Ford 2003 Mustang Workshop Manual page 2729

12. Remove the output shaft bearing snap ring and the second speed synchronizer thrust washer
(7117).
13. Remove the second speed synchronizer inner cone (7175), the second speed synchronizer
outer cone (7174), and the second speed synchronizer blocking ring (7107) as an assembly.
14. Remove the first and second gear synchronizer sliding sleeve (7124).
15. CAUTION: Note the orientation of the synchronizer hub insert springs (7109) and
the synchronizer hub inserts (7A044) for assembly reference.
NOTE: The first and second gear synchronizer sliding sleeve, the hub, and the output shaft are
an assembly. Do not attempt to separate the hub from the output shaft. Only the synchronizer
hub insert springs and the synchronizer hub inserts are available separately.
Remove the synchronizer hub insert springs and the hub inserts.