Ford 2003 Mustang Workshop Manual page 1930

SECTION 303-04A: Fuel Charging and Controls — 3.8L
REMOVAL AND INSTALLATION
Supply Manifold
Removal and Installation
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when
working on or near any fuel related components. Highly flammable mixtures are always present
and may ignite. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is
not running. Before working on or disconnecting any of the fuel lines or fuel system
components, the fuel system pressure must be relieved. Failure to follow these instructions
may result in personal injury.
1. Disconnect the battery ground cable.
2. Remove the upper intake manifold. For additional information, refer to
3. Relieve the fuel pressure. For additional information, refer to
4. Disconnect the fuel line. For additional information, refer to
5. Separate the wiring harness from the supply manifold.
6. NOTE: Right side shown, left side similar.
Disconnect the six fuel injector electrical connectors.
7. Disconnect the fuel pressure sensor.
2003 Mustang Workshop Manual
Section 303-01A
Section 310-00 .
Section 310-00 .
.