Ford 2003 Mustang Workshop Manual page 2104

SECTION 303-08: Engine Emission Control
REMOVAL AND INSTALLATION
Exhaust Manifold to Exhaust Gas Recirculation (EGR)
Valve Tube —Cobra
Removal and Installation
1. Remove the EGR valve. For addditional information, refer to
Valve—Cobra
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to
100-02 .
3. Disconnect the exhaust manifold to EGR valve tube.
4. Remove the exhaust manifold to EGR tube from the engine compartment.
5. To install, reverse the removal procedure.
in this section.
2003 Mustang Workshop Manual
Exhaust Gas Recirculation (EGR)
Section