Removal Of The Front Door Switch; Removal Of The Fusing Roller Rotation Detecting Sensor; Removal Of The Fusing Retraction Position Sensor; Removal Of The Exit Sensor - Minolta CF1501 Service Manual

(34) Removal of the Front Door Switch

1. Open the Front Door.
2. Open the Toner Supply Door.
3. Remove the Hopper Left Cover.

(35) Removal of the Fusing Roller Rotation Detecting Sensor

1. Open the Right Door and Upper Right Door.
2. Slide out the Fusing Unit.

(36) Removal of the Fusing Retraction Position Sensor

(37) Removal of the Exit Sensor

4. Remove two terminals.
5. Remove two screws and the Front Door Switch.
4004D145AA
3. Unplug one connector.
4. Remove two screws and the Fusing Roller Rota-
tion Detecting Sensor.
4004D146AA
1. Remove the Fusing Pressure/Retraction Motor
Assy.
D-44 (steps 1 through 5)
2. Remove the sensor fixing bracket and Fusing
Retraction Position Sensor.
4004D147AA
1. Open the Upper Right Door.
2. Unplug one connector.
3. Remove the sensor fixing bracket and Exit Sen-
sor.
4004D148AB
D-58