26
2. Placing Originals
Using the Single Automatic Document Feeding Mode (SADF Mode)
This is the mode in which you load your originals one by one onto the Automatic/Duplexing
Document Feeder to make a copy or copies from it. When you load the original, the copier
automatically starts the copy cycle.
NOTES
Originals available for the SADF Mode.
Type
: Plain paper
Thickness : 35g/m
Size
: A3 to A5L
The following features cannot be selected in the SADF Mode.
2-sided original
2-sided original
Dual Original Scanning Mode (2-in-1 Mode
Cover Mode
Open the Document Feed Table and
1
slide the Guide Plate to the size of the
original.
Make sure that the Start Key is lit
2
green and insert the original face down
into the Document Feed Table.
NOTES
Be sure to place one original at a time.
Be sure to correct any fold or curl in
the original.
2
2
to 200g/m
(AFR-12 . 35g/m
1-sided copy
2-sided copy
1151O018AA
1151O019AA
2
2
to 157g/m
(AF-5).
The original is automatically taken up
3
and the copy cycle is started.
Making sure that the Start Key lights
4
up green again, load the next original.