System Input - Minolta CF1501 Service Manual

(3)

System Input

• The function allows the Tech. Rep. to define the marketing area, and make settings.
Touch Panel
Display
Marketing Area Set the marketing area.
Org. Detect Option Select "ON" when the optional Original Size Detecting Sensor is
Sensor mounted.
✽ After "Set" has been selected, run "Orig. Detect Option Sensor."
Serial # Input Enter the serial number of each system component including options
from the 10-Key Pad.
NOTE
• This procedure must be performed to allow the adjustment data on
• When the "END" key is touched after the IR serial number has been
Tel. # Input Enter the telephone number that will appear on the Touch Panel
when a malfunction occurs in the copier.
<Procedure>
1. Enter the phone number from the 10-Key Pad. Use the Interrupt
2. Touch "END" to validate the phone number setting.
FLS Paper Set the size for FLS.
Book Erase Adjust the center erase width in Book copying.
(Center)
Peripheral Mode Select the type of the external I/F operation when a printer controller
is mounted.
Setting (The default is
MSJ
Set
the IR side to be transmitted to the copier.
input, data is transmitted to the copier.
key to enter a hyphen "-."
F: 330.2 mm
F: 330 mm
C: 203.2 mm
C: 210 mm
Setting
+2 .................................
Description Smaller
Mode 1 External I/F operation mode 1
Mode 2 External I/F operation mode 2
External I/F operation mode 3
Mode 3
Mode 4 External I/F operation mode 4
Mode 5 External I/F operation mode 5
S-23
).
Highlighted
ME
MC
Unset
F: 330.2 mm F: 330 mm
C: 215.9 mm C: 220 mm
................................ +30
15
Greater