Hard disk drive (HDD) / solid state disk (SSD)
7.7
SAS expander board
7.7.1
Installing the SAS expander board
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Installing the SAS expander board
Figure 163: Installing the SAS expander board
▶ Position the SAS expander board on the SAS expander board holder. Notice
the recesses and hooks (see arrows).
▶ Push the SAS expander board in the direction of the arrow (1).
▶ Fasten the SAS expander board with one screw M3 x 4.5 mm (see circle).
268
47.
Upgrade and Maintenance Manual
Hardware: 10 minutes
99.
48.
50.
TX1330 M4