Programmable Relay; Ringing Line Preference (Ringing Line Pickup) - Mitel Panther II 820 System Manual

Trillium Standard Practice
Conditions
_ -,
:_'
l
To program the Private Line, one station must be assigned to one group,
and that group must be assigned to one line. All other lines must be
pIaced in other groups.
Programming Required
. Access Code 201- Tenant Group Assignment
l
Access Code 121- Tenant Groups
l
Access Code 006 - Tenant Types
PROGRAMMABLE RELAY
Description
The Dry Contacts can be programmed to activate the Loud Bell equipment,
or optional equipment such as electronic doors, security systems, etc.,
using a programmable relay (Loud Bell / Relav Control). All users can be
programmed on a set-by-set basis to have access to the programmable relay
(Relay Control Capability). The programmable relay can operate in
Automatic or Manual mode (Automatic / Manual Return To Off).
Automatic Mode should be selected if the relay activates motorized
equipment (e.g., a motorized gate), which only requires a signal to start the
gate' s motor. If Automatic mode is selected, the relay control will turn off
automatically after a programmable length of time (Automatic Return To Off
Timing).
If the relay contact will be used for equipment which requires both a start
(ON) and stop (OFF) code (e.g., to open a door and close it after the person
has entered), then Manual Mode should be selected.
Conditions
l
Relay Control equipment is customer-supplied.
l
Since the same closure is used for Loud Bell and Relay Control, the
system must be programmed for one or the other.
Programming Required
l
Access Code 0 18 - Loud Bell / Relay Control
l
Access Code 019 - Automatic / Manual Return to OFF
l
Access Code 052 - Automatic Return to OFF Tuning
l
Access Code 111 - Relay Control Capability
RINGING LINE PREFERENCE (Ringing Line Pickup)
Description
This feature allows a station user to pick up a ringing line, simply by lifting
the handset (or pressing the SPEAKER key if handsfree). The feature is
Features
and
Services
Page20