Displays In The Viewfinder - Ikegami UHL-43 Operation Manual

5 Camera Setting and Adjustment
5.6 Displays in the
Viewfinder
Details are provided below.
Display Mode
The display mode sets the markers and characters to be
Reference
See "5.2 Menu structures and contents" for how the
display mode is set from the menu.
Viewfinder Display
Status Display
SCAN FORMAT
①
Camera Fan status
②
Camera temperature warning
③
External Power Voltage
④
SKIN DTL ON
⑤
GAIN UP value
⑥
ND, CC filter indication ⑦
AWB Memory Channel
⑧
Function Display in the Viewfinder
① SCAN FORMAT
Displays the setting values for the operation format of the
camera.
② Camera Fan Status
The fan status is displayed.
AUTO : Fan is in the AUTO mode.
Displayed when the CHAR switch is pressed.
abnormally.
③ Camera temperature warning
Displays when the temperature inside the Camera exceeds the
recommended maximum.
④ External power supply voltage
Displays the external power supply voltage when the external
power supply voltage is used to operate the camera.
⑤ SKIN DTL ON/OFF
"SK" is displayed when the SKIN DTL function is ON.
⑥ GAIN UP value
Displays for 2 seconds when the increment of the step gain is
switched.
The step position is one of the following: -3dB, 0dB, +3dB,
+6dB, +9dB, +12dB.
42
⑦ ND and CC filter numbers
ND
CLEAR
CC
3200K
⑧ AWB memory channel
The memory selected by the AWB SELECT switch is
displayed.
A : A-ch memory
B : B-ch memory
O : White balance adjustment is in the preset condition
(3200K).
⑨ OAC Indicator
Displays when "OAC GUIDE MARK" is set to "ON" in the
ABERRATION CORR.").
: Displays for 2 seconds when the aberration correction
value is properly received from the serial lens. The
displayed. Also it is displayed while CHAR switch is
pressed.
: Flashes when the zoom position information of the lens
OAC Indicator
⑨
is not linked normally. Please move the zoom.
⑩ AVC Indicator
⑪ ATW Indicator
: Flashes when the iris position information of the lens is
value
⑫ IRIS
not linked normally. Please move the iris.
LENS REMOTE
⑬
ZOOM Indicator
⑭
: Flashes when the focus position information of the lens
FOCUS Indicator
⑮
is not linked normally. Please move the focus.
SHUTTER Indicator
⑯
Super V Indicator
⑰
⑩ AVC Indicator
Displayed during AVC operation.
AVC-D : DAY mode
AVC-N : NIGHT mode
⑪ ATW Indicator
Displayed during ATW operation.
⑫ IRIS value
Displayed when the lens is connected.
⑬ LENS REMOTE
Displayed when the operation of the lens is remote controlled
(at the OCP-300, etc.). The remote operation of the lens is
acquired or released using the operation control panel.
⑭ ZOOM indicator
Displays the lens zoom position (0 to 100).
⑮ FOCUS indicator
Displays the lens focus position (0 to 100).
⑯ Shutter indicator
Displays the shutter speed value when the Shutter is turned
on.
⑰ Super V Indicator
Appears for 2 seconds when the Super V is turned on. Also it
is displayed while CHAR switch is pressed.
Note
Super V function works only on Interlace formats 1080i.
UHL-43 2005 VER1 (E)
1 2 3
1/4ND 1/8ND 1/16ND
A B C
4300K 6300K CROSS
4 5
1/64ND
D E
3200K
(OPTION)