Scan To Ftp Transmission; Scan To Smb Transmission - Konica Minolta bizhub C200 Service Manual

8. Troubleshooting
8.2.11

Scan to FTP transmission

1
Error code
ED0101 User name length error.
ED0102 Password length error.
ED0103 Server address is illegal.
ED0201 Socket generation error.
ED0202 Connection timeout.
ED0203 DNS error.
ED0204 Server cannot be used.
ED0205 Other timeout.
ED0301 TX error.
ED0302 RX error.
ED0303 Communication timeout.
ED0304 Other socket communication error.
ED0401 Render malfunction.
ED0501 Suspension due to suspension request.
EDFFFF Other malfunction.
8.2.12

Scan to SMB Transmission

1
Error code
EE09C6 No response by destination PC.
EE09C7 Login failed.
EE09C8 No destination folder.
EE09C9 Disk is full.
EE09CA Command timeout.
EE09CB No access authority.
EE09CF Lower module is not initialized.
EE0AC0 Render error.
98
1
Possible cause
Possible cause
Field Service Ver. 2.0 Dec. 2008
Action to be taken
Confirm whether the length of the user
name is at least one character and not
greater than the maximum length.
Confirm whether the length of the password
is at least one character and not greater
than the maximum length.
Confirm whether the IP address of the FTP
server is at least one character.
Confirm the settings.
Confirm whether the machine can be con-
nected.
Confirm the DNS settings.
Confirm whether the FTP server at the TX
destination is started.
Confirm the connection status and settings.
Confirm the settings.
Confirm the settings.
Confirm whether the connection is discon-
nected.
Confirm the settings.
Re-send the suspended job.
Confirm the connection status and settings.
Action to be taken
Confirm the address, server existence, and
network condition.
Confirm whether the user name and pass-
word are correct.
Confirm whether the specified folder is cor-
rect.
Confirm whether capacity is available on
the disk of the TX destination (SMB).
Re-send.
Confirm whether the TX destination folder is
shared.
Re-start the machine.