SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technolo- gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the...
Page 4
11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis- tent with 48 C.F.R.
Page 5
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for any particular pur- pose or to produce any particular result. Adobe shall not be liable for loss or damage aris- ing out of this Agreement or from the distribution or use of the Software or any other materials.
Page 6
9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such laws are applied to agree- ments entered into and to be performed entirely within California between California resi- dents.
Page 8
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PRO- CUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROF- ITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLI- GENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SER- VICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABIL- ITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 10
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 11
Part 4: Sun Microsystems, Inc. copyright notice (BSD) Copyright (c) 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc.
Page 12
PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABIL- ITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 13
THIS SOFTWARE IS NOT ORIGINAL MIT SOFTWARE, MODIFIED BY KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.,...
Contents 1 Operation on Mac OS X ..................1 System Requirements for the Printer Driver 2 Installing the Printer Driver 3 Installing the Printer Driver Print Center Settings (Mac OS X 10.2) 8 When Using a USB Connection When Using a Network Connection AppleTalk Setting 10 Rendezvous Setting 12 IP Printing Setting 15...
Page 16
When Using a Network Connection Bonjour Setting 35 AppleTalk Setting 38 IP Printing Setting 40 Printer Settings (Mac OS X 10.5/10.6) 44 When Using a USB Connection When Using a Network Connection Bonjour Setting 48 AppleTalk Setting 51 IP Printing Setting 54 Selecting Print Options 58 For Mac OS X 10.2/10.3/10.4 For Mac OS X 10.5/10.6...
Page 17
Advanced Color Options/Text Advanced Color Options/Graphics Advanced Color Options/Simulation Printer Features Supply Levels Summary Specifying the Color Profile 98 Preparation Downloading Color Profiles Specifying Printer Driver Settings System Requirements for the Scanner Driver 105 Installing the Scanner Driver 106 Installing the Scanner Driver 106 Scanning From a Computer Application 110 Basic Scanning Operation Uninstalling the Scanner Driver 111...
Page 18
Printing a Document 150 Example Using LPR Command Example Using OpenOffice Checking Print Jobs 155 Troubleshooting 156 4 Operation on NetWare .................. 157 Printing With NetWare 158 Network Printing in a NetWare Environment For Remote Printer Mode With NetWare 4.x Bindery Emulation For Print Server Mode With NetWare 4.x Bindery Emulation For NetWare 4.x Remote Printer Mode (NDS) For NetWare 4.x/5.x/6 Print Server Mode (NDS)
Page 19
Starting Up LSU Main LSU Window 209 Connecting to the Machine Downloading Information from the Machine Uploading Information to the Machine Dial Import/Dial Export Registering Dialing Settings 211 Programming a Speed Dial Number Adding a Speed Dial Number (Fax/E-mail) For registering a fax number 212 For registering an E-mail address 213 Adding a Speed Dial Number (Scan To Server) For FTP transmissions 214...
Page 20
SLP 240 SNMP 241 WSD PRINT 241 IPSEC 241 IP ADDR. FILTER 241 IPv6 242 NETWARE 243 APPLETALK 243 SPEED/DUPLEX 243 IEEE802.1X 243 9 Network Printing ................... 245 Network Connection 246 Theory Making the Connection Ethernet Interface 247 Using DHCP 247 Setting the Address Manually 248 Network Printing 251 AppleTalk 251...
Page 21
Adding an IPP Port using Add Printer Wizard – Windows Server 2003/XP/2000 259 Adding an IPP Port using Add Printer Wizard – Windows Vista/7/Server 2008 261 Printing via Web Service Print Function With Windows Server 2008 263 Making the printer driver known from the Network window 263 Adding a printer from the Network window 264 Adding a printer using Add Printer Wizard 267 Updating the driver after connecting this machine 272...
Page 22
Print Page Default Settings 309 Font/Form 321 Report Types 325 Direct Print 326 Scan Page Favorite (shown above) 327 Speed Dial Setting 328 Group Dial Setting 329 Configuring the Printer 330 System Page Device Information 331 Counter 341 Online Assistance 343 Import/Export 345 Authentication 347 Date/Time 351...
Page 23
AppleTalk 481 Email 482 SMB 488 SSL/TLS 489 SSL/TLS Information 489 SSL/TLS Setting (When a certificate is not installed) 490 SSL/TLS Setting (When a certificate is installed) 491 Self-signed Certificate Setting 492 Request a certificate 494 Certificate Request 496 Install a Certificate 497 Encryption Strength Setting 498 Remove a Certificate 499 Mode Using SSL/TLS 500...
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Computer Apple Macintosh computer installed with the following processor: – PowerPC G3 or later processor (Pow- erPC G4 or later is recommended) –...
Installing the Printer Driver You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications. Installing the Printer Driver The procedure for installing the printer driver on Mac OS X 10.4 is described below.
Page 28
Click Continue. Click Continue. Installing the Printer Driver...
Page 29
Check the details of the license agreement, and then click Continue. Click Agree in the confirmation dialog box if you agree to the terms of the license. Installing the Printer Driver...
Page 30
In the Select a Destination page, select the disk in which you wish to install the software, and then click Continue. Click Install in the Easy Install page. Installing the Printer Driver...
Page 31
Enter the administrator user name and password in the Authenticate dia- log box, and then click OK. Installation starts. After the installation has been completed, click Close. This completes the installation of the printer driver. Installing the Printer Driver...
Print Center Settings (Mac OS X 10.2) Before specifying the Printer Setup Utility settings, set USB SET- (in the menu) to TING UTILITY - ADMIN. MANAGEMENT For details, refer to the Printer/Copier/Scanner User’s Guide on the Documentation CD/DVD. When Using a USB Connection Use a USB cable to connect the printer to your computer.
Page 33
Select bizhub C20 in the Product list. If bizhub C20 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Select KONICA MINOLTA from the Printer Model pop-up menu.
When Using a Network Connection The network connection settings can be specified in one of five ways: AppleTalk setting, Rendezvous setting, IP printing setting, IPP setting and Specifying Port 9100. AppleTalk Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 35
"XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C20 PPD in the Name list. Print Center Settings (Mac OS X 10.2)
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. Rendezvous Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 37
Select Rendezvous from the pop-up menu. Select KONICA MINOLTA bizhub C20(xx:xx:xx). "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Select KONICA MINOLTA from the Printer Model pop-up menu. Print Center Settings (Mac OS X 10.2)
Page 38
Select KONICA MINOLTA bizhub C20 PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. Print Center Settings (Mac OS X 10.2)
IP Printing Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Select IP Printing from the pop-up menu. Print Center Settings (Mac OS X 10.2)
Page 40
Enter the IP address for the printer in the Printer's Address text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C20 PPD in the Model Name list. Print Center Settings (Mac OS X 10.2)
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. IPP Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 42
Select Advanced from the pop-up menu. Select Internet Printing Protocol (http) from the Device pop-up menu. Enter the name for the printer in the Device Name text box. In the Device URI text box, enter "http://<IP address>/ipp". Print Center Settings (Mac OS X 10.2)
Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C20 PPD in the Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options”...
Page 44
In the Printer List, click Add while pressing the Option key in the key- board. Select Advanced from the pop-up menu. Select AppSocket/HP JetDirect from the Device pop-up menu. Print Center Settings (Mac OS X 10.2)
Page 45
Enter the name for the printer in the Device Name text box. In the Device URI text box, enter "socket://<IP address>". Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C20 PPD in the Name list. Print Center Settings (Mac OS X 10.2)
Page 46
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. Print Center Settings (Mac OS X 10.2)
Printer Setup Utility Settings (Mac OS X 10.3) Before specifying the Printer Setup Utility settings, set USB SET- (in the menu) to TING UTILITY - ADMIN. MANAGEMENT For details, refer to the Printer/Copier/Scanner User’s Guide on the Documentation CD/DVD. When Using a USB Connection Use a USB cable to connect the printer to your computer.
Page 48
Select bizhub C20 in the Product list. If bizhub C20 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Select KONICA MINOLTA from the Printer Model pop-up menu.
Page 49
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. Printer Setup Utility Settings (Mac OS X 10.3)
When Using a Network Connection The network connection settings can be specified IP printing Setting (IPP, LPD or Socket). AppleTalk Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List.
Page 51
"XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C20 PPD in the Model Name list. Printer Setup Utility Settings (Mac OS X 10.3)
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. Rendezvous Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 53
"xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA bizhub C20 PPD in the Model Name list. Printer Setup Utility Settings (Mac OS X 10.3)
Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. IP Printing Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 55
- For a port 9100 setup, select Socket/HP Jet Direct. Enter the IP address for the machine in the Printer Address text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Printer Setup Utility Settings (Mac OS X 10.3)
Page 56
Select KONICA MINOLTA bizhub C20 PPD in the Model Name list. Click Add. The new printer appears in the Printer List screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 58. Printer Setup Utility Settings (Mac OS X 10.3)
Printer Setup Utility Settings (Mac OS X 10.4) Before specifying the Printer Setup Utility settings, set USB SET- (in the menu) to TING UTILITY - ADMIN. MANAGEMENT For details, refer to the Printer/Copier/Scanner User’s Guide on the Documentation CD/DVD. When Using a USB Connection Use a USB cable to connect the machine to your computer.
Page 58
Select bizhub C20 in the Printer Name. If bizhub C20 does not appear, check that the machine is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list.
When Using a Network Connection The network connection settings can be specified in one of three ways: Bonjour Setting, AppleTalk Setting and IP printing Setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 60
Select KONICA MINOLTA bizhub C20 (xx:xx:xx) in the Printer Browser. “xx:xx:xx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list. Click Add. Printer Setup Utility Settings (Mac OS X 10.4)
Page 61
Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click Continue. The new printer appears in the Printer List screen. Printer Setup Utility Settings (Mac OS X 10.4)
AppleTalk Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. The detected printer appears in the Printer Browser. Printer Setup Utility Settings (Mac OS X 10.4)
Page 63
Select BHC20-xxxxxx in the Printer Name list. “xxxxxx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list. Click Add. The new printer appears in the Printer List screen.
IP Printing Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Click IP Printer. Printer Setup Utility Settings (Mac OS X 10.4)
Page 65
Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jet Direct - Socket. Printer Setup Utility Settings (Mac OS X 10.4)
Page 66
- For an LPD setup, type “lp” in the Queue text box. - For an IPP setup, type “ipp” in the Queue text box. Select KONICA MINOLTA bizhub C20 PPD in the Print Using list. Click Add. Printer Setup Utility Settings (Mac OS X 10.4)
Page 67
Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click Continue. The new printer appears in the Printer List screen. Printer Setup Utility Settings (Mac OS X 10.4)
Printer Settings (Mac OS X 10.5/10.6) Before specifying the Printer settings, set (in the USB SETTING menu) to . For details, UTILITY - ADMIN. MANAGEMENT refer to the Printer/Copier/Scanner User’s Guide on the Documenta- tion CD/DVD. When Using a USB Connection Use a USB cable to connect the printer to your computer.
Page 69
The detected printer appears in the Printer Browser. Select KONICA MINOLTA bizhub C20 in the Printer Name list. Printer Settings (Mac OS X 10.5/10.6)
Page 70
If KONICA MINOLTA bizhub C20 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list. Click Add.
Page 71
Click Continue. The new printer appears in the Print & Fax screen. Printer Settings (Mac OS X 10.5/10.6)
When Using a Network Connection The network connection settings can be specified in one of three ways: Bon- jour Setting, AppleTalk Setting and IP printing Setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Select System Preference from the Apple menu. Click Print &...
Page 73
The detected printer appears in the Printer Browser. Select KONICA MINOLTA bizhub C20 (xx:xx:xx) in the Printer Name list. “xx:xx:xx” refers to the last six digits of the MAC address (in hexadeci- mal). Printer Settings (Mac OS X 10.5/10.6)
Page 74
Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list. Click Add. Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click Continue. The new printer appears in the Print & Fax screen.
AppleTalk Setting Mac OS X 10.6 does not support AppleTalk. Connect the machine to an Ethernet network. Select System Preference from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6)
Page 76
Select BHC20-xxxxxx in the Printer Name list. “xxxxxx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list. Printer Settings (Mac OS X 10.5/10.6)
Page 77
Click Add. Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click Continue. The new printer appears in the Printer List screen. Printer Settings (Mac OS X 10.5/10.6)
IP Printing Setting Connect the machine to an Ethernet network. Select System Preference from the Apple menu. Click Print & Fax. In the Print & Fax, click + button. Printer Settings (Mac OS X 10.5/10.6)
Page 79
Click IP. Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jetdirect - Socket. Printer Settings (Mac OS X 10.5/10.6)
Page 80
- For an LPD setup, type “lp” in the Queue text box. - For an IPP setup, type “ipp” in the Queue text box. Check that KONICA MINOLTA bizhub C20 PPD is selected in the Print Using list. Click Add.
Page 81
Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click Continue. The new printer appears in the Print & Fax screen. Printer Settings (Mac OS X 10.5/10.6)
Selecting Print Options For Mac OS X 10.2/10.3/10.4 Open Printer Setup Utility (Print Center), which can be accessed by clicking Startup disk, then Applications, then Utilities. Select this printer in the Printer List, and then select Show Info from the Printers menu.
Page 83
Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click Apply Changes. Close the Printer Info dialog box. Selecting Print Options...
For Mac OS X 10.5/10.6 Select System Preference from the Apple menu. Click Print & Fax. Select this printer in the Printers List, and then click Options & Sup- plies. Select Driver. Selecting Print Options...
Page 85
Select the appropriate settings in the Printer Memory, Storage, and Paper Source Unit according to your printer setup. Click OK. Close the Print & Fax screen. Selecting Print Options...
Specifying Page Setup Settings The following dialog box appears when Page Setup... is selected from the File menu in the application being used. Select Page Setup... from the File menu. The Page Setup dialog box appears. Select this printer in the Format for pop-up menu. You can select the following sections from the Settings pop-up menu.
Page Attributes Options The Page Attributes section is used to specify the settings for the paper size, scaling, and print orientation. Paper Size Select the desired paper size from the Paper Size pop-up menu. Orientation Select either a vertical or horizontal page orientation for printouts. Scale If you want to enlarge or reduce the size of the printout, enter the scale ratio here (25-400%).
Specifying Custom Paper Size You can also specify a paper size that is not listed in the Paper Size pop-up menu. Select Manage Custom Sizes from the pop-up menu, in the Page Setup dialog box. The Custom Page Sizes dialog box appears. Click this button to create a new custom page size.
Specifying Print Settings (Mac OS X 10.4) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Section Description Color Options This section contains options for color print- ing. Printer Features This section contains options for specifying whether or not paper of the nearest size is automatically detected when no paper tray is loaded with paper of the same size as the document and for specifying how the back of the paper is printed.
Copies & Pages The Copies & Pages section is used to specify the number of copies to print and the range of pages to print. Copies This specifies the number of copies to be printed. If the Collated check- box is selected, all pages in the documents are printed as sets of print- outs.
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Page Order Automatic: Select this option to print in the original page order of the document.
ColorSync Color Conversion Allows you to select host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter. Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type.
Error Handling PostScript Errors Allows you to select whether or not a report is outputted when a Post- Script error occurs. Tray Switching This feature is not available with this printer. Specifying Print Settings (Mac OS X 10.4)
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Color Options Quick Color Allows you to select a color preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Economy Print Allows you to set Economy Print Mode. Edge Strength Allows you to select Edge Strength.
Advanced Color Options/Image RGB Source Allows you to select RGB color profiles for images. RGB Intent Allows you to select color intent for RGB images. RGB Gray Treatment Allows you to select RGB gray treatment for images. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images.
In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Applications\Download Manager bizhub C20. After creating the folder “Download Manager bizhub C20” in the “Applications” folder, copy Download Manager.app into the created folder. Advanced Color Options/Text RGB Source Allows you to select RGB color profiles for text.
In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Applications\Download Manager bizhub C20. After creating the folder “Download Manager bizhub C20” in the “Applications” folder, copy Download Manager.app into the created folder. Advanced Color Options/Graphics RGB Source Allows you to select RGB color profiles for graphics.
Page 102
Options pane, Download Manager must be copied into the folder at the path Applications\Download Manager bizhub C20. After creating the folder “Download Manager bizhub C20” in the “Applications” folder, copy Download Manager.app into the created folder. Specifying Print Settings (Mac OS X 10.4)
Advanced Color Options/Simulation Simulation Profiles A llows you to select color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select Simulation gray treatment. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane.
In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Applications\Download Manager bizhub C20. After creating the folder “Download Manager bizhub C20” in the “Applications” folder, copy Download Manager.app into the created folder. Printer Features...
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X v10.4 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Specifying Print Settings (Mac OS X 10.5/ 10.6) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Section Description Scheduler This section contains options for specifying the print timing and priority of jobs. Color Options This section contains options for color print- ing. Printer Features This section contains options for specifying whether or not paper of the nearest size is automatically detected when no paper tray is loaded with paper of the same size as the document and for specifying how the back of...
In order to use the collate function, an optional hard disk kit or a CompactFlash card of 1 GB or more must be installed. If a collate function is provided with the application, the setting specified from the application is given priority, and the setting specified in the printer driver is ignored.
Border This prints a border around the image for each of the pages printed on one sheet of paper when more than one page is printed on one sheet of paper. Two-Sided Select the desired setting for double-sided printing. Off: Double-sided printing is not performed.
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Pages To Print All pages: Select this option to print all pages. Odd Only: Select this option to print only the pages with odd page num- bers.
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. Billing Info Allows you to set billing information printed on cover page. Specifying Print Settings (Mac OS X 10.5/10.6)
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Color Options Quick Color Allows you to select a color preset. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Economy Print Allows you to set Economy Print Mode. Edge Strength Allows you to select Edge Strength.
Advanced Color Options/Image RGB Source Allows you to select RGB color profiles for images. RGB Intent Allows you to select color intent for RGB images. RGB Gray Treatment Allows you to select RGB gray treatment for images. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images.
Advanced Color Options/Text RGB Source Allows you to select RGB color profiles for text. RGB Intent Allows you to select color intent for RGB text. RGB Gray Treatment Allows you to select RGB gray treatment for text. Destination Profile Allows you to select Destination Profile for text. Halftone Allows you to select halftone for text.
Advanced Color Options/Graphics RGB Source Allows you to select RGB color profiles for graphics. RGB Intent Allows you to select color intent for RGB graphics. RGB Gray Treatment Allows you to select RGB gray treatment for graphics. Destination Profile Allows you to select Destination Profile for graphics. Halftone Allows you to select halftone for graphics.
Advanced Color Options/Simulation Simulation Profile Allows you to select color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select Simulation gray treatment. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane.
Printer Features Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automati- cally enlarged or reduced and paper of the most appropriate size is selected. Manually Print on 2nd Side This feature must be set when you set paper already printed on the front side.
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X 10.5/10.6 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Specifying the Color Profile Use Download Manager to download any color profile to the hard disk or the CompactFlash card of the machine. By adding color profiles to the printer driver, printing can be performed by specifying any color profile. The procedure for specifying the color profile on Mac OS X 10.5 is described below.
Page 123
Click Download, and then select Disk beside Location. Click Browse, and then select the color profile to be downloaded. File names for color profiles should be in the following format: 8 or less ASCII characters + 3 or less ASCII extension characters. Click Download Profile.
Click OK. Click Exit. Next, specify the printer driver settings. Specifying Printer Driver Settings Add the color profile to the printer driver. Display the Print dialog box for the application. Select Color Options. Specifying the Color Profile...
Page 125
Select Custom beside Quick Color, and then click Advanced Color Options. Click Manage Profile. Specifying the Color Profile...
Page 126
From Profile List, select the type of profile to use. For an IPP (Internet Printing Protocol), LPD (Line Printer Daemon) or Socket/HP JetDirect (Port 9100) connection, continue with step Select the color profile to use from the list, and them click Add. Specifying the Color Profile...
Page 127
Click OK. Select Simulation. Specifying the Color Profile...
Page 128
Select the added color profile before printing. Specifying the Color Profile...
System Requirements for the Scanner Driver Before installing the scanner driver, make sure that your system meets the following system requirements. Computer Apple Macintosh computer installed with the following processor: – PowerPC G3 or later processor (Pow- erPC G4 or later is recommended) –...
The scanner driver for Mac OS X 10.6 is included in the Drivers CD/DVD (For Windows 7/Mac OS X 10.6). Double-click the CD icon on the desktop, Mac folder, Scanner Driver folder and then double-click the KONICA MINOLTA bizhub C20 Scanner.pkg. The installer for the scanner driver starts up.
Page 131
Click Continue. Click Continue. Check the details of the license agreement, and then click Continue. Installing the Scanner Driver...
Page 132
Click Agree in the confirmation dialog box if you agree to the terms of the license. In the Select a Destination page, select the disk in which you wish to install the software, and then click Continue. Click Install in the Easy Install page. Installing the Scanner Driver...
Page 133
Enter the administrator user name and password in the Authenticate dia- log box, and then click OK. Installation starts. After the installation has been completed, click Close. This completes the installation of the scanner driver. Installing the Scanner Driver...
Place the document to be scanned in the ADF or on the original glass. Start the application to be used for scanning. Start the scanner driver according to the application settings. – When connecting via network, select KONICA MINOLTA bizhub C20 Network. – When connecting with a USB cable, select KONICA MINOLTA bizhub C20.
Uninstalling the Scanner Driver Double-click KONICA MINOLTA bizhub C20 Uninstaller.app, which can be accessed by clicking Library, then Application Support, KONICA MINOLTA, then bizhub C20. Click Uninstallation. Click OK. Enter the administrator user name and password, and then click OK.
Page 136
Click OK. This completes the uninstallation of the scanner driver. Uninstalling the Scanner Driver...
Specify the Scan Settings Auto Scanning Mode Load Specify a saved settings file (dat file) for scanning. Save Save the current settings as a settings file (dat file). Default Return all settings to their defaults. Help icon Click to display the Help. About icon Click to display the software version information.
Page 138
Scale Shows the width and height of the area to be scanned. If the resolution is set at 1200 × 1200dpi or higher, a setting larger than 100% cannot be specified. Scanning Mode Select Auto or Manual. When Manual is selected, settings can be speci- fied for Brightness/Contrast, Filter, Curves, Levels, Color Balance and Hue/Saturation.
Before/After (RGB) Move the pointer in the preview window to display the color tones at the pointer's position before and after adjustments. Width/Height Displays the width and height for the selected area in the selected mea- surement units. Manual Scanning Mode When Manual is selected for Scanning Mode, various setting for scanning tone are available.
Page 140
Filter This function is used to sharpen the image or blur it for special effect. Curves This function is used to set the gamma of the image. In the graph, the X-axis represents the input level, and the Y-axis represents the output level.
Page 141
Levels This function is used to set the gamma value, increase shadow and high- light areas, enhance shadow value and reduce highlight value. The X-axis indicates the scaling value and the Y-axis indicates the pixel value. The shadow, gamma and highlight values for the scanned image can be adjusted by dragging the triangular pointer right below the X-axis.
Page 142
Hue/Saturation This function is used to set hue and saturation as well as the lightness of the image. Specify the Scan Settings...
Troubleshooting Symptom Solution The setting in the saved Depending on the functions selected for the presets are not applied. printer, some preset settings are not saved. Media type error appears. If a media type, such as “Transparency”, is specified for Tray 2, a media type error appears and the printer stops.
Page 144
Symptom Solution When printing 2 pages on a Depending on the operating system, the single sheet of paper, the pages are not centered on the paper when pages are not centered on printing two pages on a single sheet of paper the paper.
Installing the Printer Driver For the system requirements for the printer driver, refer to the User's Guide on the Documentation CD/DVD. You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications.
Page 147
Select the connection type according to the environment. For a local connection: Click Use an existing port, and then select USBXXX. For a network connection: Click Create a new port, and then select Stan- dard TCP/IP port. Click Next. If a network connection was selected, continue with step 7. If a local connection was selected, continue with step 8.
Page 148
Select the TCP/IP Device type list and type the IP address for the printer in the Hostname or IP address text box, and then click Next. Installing the Printer Driver...
Page 149
Choose Have Disk, locate the directory on the CD/DVD where the printer driver files are located. The XPS printer driver is available in the corresponding “XPS\<lan- guage>” folder on the CD/DVD. Use the appropriate XPS printer driver for the language. Installing the Printer Driver...
Page 150
Select SETUP.INF, and then click Open. Click OK. Installing the Printer Driver...
Page 151
Click Next. Click Next. Installing the Printer Driver...
Page 152
When Windows Security screen pops up, click Install this driver soft- ware anyway. Select whether the printer driver is to be shared, and then click Next. Installing the Printer Driver...
Page 153
Click Finish. This completes the installation of the printer driver. Installing the Printer Driver...
Before proceeding with the installation, be sure to exit all running applications. Click Start, click Control Panel, and then click Printers. Right-click the KONICA MINOLTA bizhub C20 XPS printer icon, and then click Properties. Select the Device Settings tab. From the Installable Options list, select the appropriate settings in the Paper Source Unit, Storage, and Printer Memory according to your printer setup.
Page 155
Select the General tab. Click Printing Preferences. Selecting Print Options/Defaults...
Page 156
Select the default settings for your printer, such as the default media for- mat you use, on the appropriate tabs. Click Apply. Click OK to exit from the Print Preference dialog box. Click OK to exit from the Properties dialog box. Selecting Print Options/Defaults...
Allow button or the Continue button. Close all applications. From the Start menu, click Control Panel, then Printers. Right-click the KONICA MINOLTA bizhub C20 XPS printer icon, and then click Delete. Click Yes to verify the driver deletion. Right-click in the Printer window, and then click Server Properties.
Specifying Printer Driver Settings Click Start, click Control Panel, and then click Printers. Right-click the KONICA MINOLTA bizhub C20 XPS printer icon, and then click Printing Preferences. Common buttons Click to exit the Properties dialog box, saving any changes made.
Advanced Options Paper Size Select the output media size. Copy Count Specify the number of copies. Manually Print on 2nd side Print on the back side of paper that has already been printed on. Color Separation Perform color separation. Brightness Control the darkness of an image.
Edge Strength Set the edge strength to Off, Low, Middle or High. Economy Print Select whether or not economy printing is used. Simulation Profile Specify a related profile. Match Paper Color Turn on/off match paper color. Paper/Quality Paper Source Specify the paper source. Media Specify the type of media.
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Operating systems Red Hat Linux 9.0, SuSE Linux 8.2 Connecting the computer USB connection (USB 2.0 (High-Speed)), and printer Network connection (10Base-T/100Base-TX/ 1000Base-T) More than OS recommendation (128 MB or...
Installing PPD File From the Command Line Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to install ppd file. Copy the ppd file from the Drivers CD/DVD to the “/usr/share/cups/model” on the computer.
Adding the Printer After copying the PPD file, be sure to restart CUPS. Start up the Web browser. Enter the URL “http://localhost:631”, and then click Manage Printers. The CUPS Administration Web page appears. Click Add Printer. A pop-up window appears. Enter the user name and password for using root privi- leges, and then click OK.
Page 165
IP or Printer Hostname>[:port] Example: Using Printer IP - socket:/ /192.168.1.2:9100 Using printer Hostname - socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. Click Continue. Select KONICA MINOLTA, click Continue. Adding the Printer...
Page 166
Select KONICA MINOLTA bizhub C20 PPD (en), then click Continue. The following message appears. Adding the Printer...
Specifying Printer Driver Settings Displaying the Settings Page Start up the Web browser. Enter the URL “http://local- host:631”, and then click Manage Printers. Printer on localhost.local- domain window appears. Click Configure Printer. The printer driver settings page appears. Specifying Printer Driver Settings...
Printer Driver Settings Extra Parameters Settings Brightness Specifies the brightness of the image as -15%, -10%, -5%, 0%, 5%, 10%, or 15%. The default setting is 0%. Color Separation Specifies the color separation as On or Off. The default setting is Off. Economy Print Select whether or not economy printing is used.
General Parameters Settings Collate If On is selected, all pages in the documents are printed as sets of printouts. The default setting is Off. Duplex Options Specifies the duplex print binding position as Simplex, Long Edge, or Short Edge, if the duplex unit for the printer has been installed.
Graphics Options Parameters Settings Graphics Edge Enhance- Select whether graphic edges are empha- ment sized. The default setting is On. Graphics Halftone Specifies the halftone for graphic as Line Art, Detail or Smooth. The default setting is Detail. Graphics RGB Gray Treat- Specifies the RGB Gray Treatment as Com- ment posite Black, Black and Gray, or Black...
Parameters Settings Image RGB Intent Specifies RGB intent for image as Vivid, Photographic, Relative Color, or Absolute Color. The default setting is Photographic. Image RGB Source Specifies RGB source for image as None, sRGB, Adobe RGB (1998), Apple RGB, ColorMatch RGB, or Blue Adjust RGB. The default setting is sRGB.
Simulation Parameters Settings CMYK Gray Treatment Specifies simulation gray treatment as Com- posite Black, Black and Gray, or Black Only. The default setting is Composite Black. Match Paper Color Specifies the Match Paper Color. The default setting is Off. Simulation Profile Specifies the simulation profile as None, SWOP, Euroscale, Commercial Press, DIC, or TOYO.
Banners Parameters Settings Starting Banner Specifies the starting banner as none, clas- sified, confidential, secret, standard, topsecret, or unclassified. The default setting is none. Ending Banner Specifies the ending banner as none, classi- fied, confidential, secret, standard, topsecret, or unclassified. The default setting is none.
Printing a Document The contents and available options that appear in the print dialog box may vary depending on the application being used. Example Using LPR Command With applications other than OpenOffice, the following print dialog box appears. Click Properties in the Print dialog box.
Example Using OpenOffice The procedure for printing on Red Hat 9 with OpenOffice 1.0.2 is described below. The following procedure or some steps may be dif- ferent depending on the version of the operating system being used. First, use kmC20np.ppd to add the printer to the system. For details on adding a printer to the system, refer to “Installing PPD File From the Command Line”...
Page 176
Click Browse. In the Path, enter “/usr/ share/cups/model/”, then click Select. In the Selection of drivers list, select KONICA MINOLTA bizhub C20 OpenOffice PPD, then click Printing a Document...
Page 177
In the Please select a suit- able driver list, select KONICA MINOLTA bizhub C20 OpenOffice PPD, then click Next. Select the command to be displayed in the list, then click Next. Change the printer name. Click Finish. The Printer Administration dialog box appears again.
Page 178
Click Print in the File menu. Select the name of the printer specified in the Ope- nOffice printer settings. Click OK. The printer Print dialog box appears. Printing a Document...
Checking Print Jobs You can check the status of print jobs from a Web browser. Start up the Web browser. Enter the URL “http://local- host:631”. The CUPS Administration Web page appears. Click Manage Jobs. A list of the currently active print jobs appear.
Troubleshooting Symptom Action The printer stops because The job may have been sent with a prohibited of a paper size error or a combination of settings (for example, for the paper type error. paper size and media type). Printing is not possible with postcards or overhead projector transparencies if Plain Paper is selected.
Printing With NetWare The printer controller supports the following environments. Network Printing in a NetWare Environment NetWare Version Protocol Used Emulation Service Mode NetWare 4.x Bindery/NDS Pserver/Nprinter NetWare 5.x/6 Pserver TCP/IP NDPS(lpr) For Remote Printer Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is com- patible with the NetWare server.
Page 183
In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following settings. – NetWare Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select NPrinter/RPrinter.
For Print Server Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is com- patible with the NetWare server. From a client computer, log on with Supervisor permissions to access the NetWare server where the Pserver is registered. Start up Pconsole.
– NetWare Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step 4. – Print Server Password: Specify only when setting from the NetWare server.
Page 186
In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following settings. – NetWare Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select NPrinter/RPrinter.
For NetWare 4.x/5.x/6 Print Server Mode (NDS) To use the Print Server mode, the IPX protocol must be loaded on the NetWare server. Log on to NetWare as an administrator from a client computer. Start up NWadmin. Select either the organization or organizational unit container that offers the print service, and then click Print Services Quick Setup (non-NDPS) on the Tools menu.
– NetWare Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network envi- ronment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step – Print Server Password: Specify only when setting from the NetWare server.
In the Gateway Types, select Novell Printer Gateway, and then register In the Configure Novell PDS for Printer Agent window, select (None) for the printer type and Novell Port Handler for the port handler type, and then register the settings. In Connection type, select Remote (LPR on IP), and then register it.
About LinkMagic By installing LinkMagic on a computer connected to this machine, the follow- ing operations can be performed from the computer. Saving scanned images as files Saving scanned images to the Clipboard Attaching scanned images to an E-mail message Printing scanned images Registering frequently used software LinkMagic Operating Environment...
Before Using LinkMagic Before using LinkMagic, connect the machine to the computer with the USB cable or via a network, and then install LinkMagic on the computer. Use the USB cable or Ethernet cable to connect this machine to the com- puter.
When a message appears, indicating that the installation of LinkMagic is finished, click the Finish button. The installation of LinkMagic is completed. Starting Up LinkMagic LinkMagic can be set to automatically start up when the computer starts up. When LinkMagic is running, the following icon appears in the taskbar of the computer.
Main LinkMagic Window No. Name Description “Scan Modes” This group box contains buttons programmed group box with various LinkMagic functions. Scan Image but- Click this button to save the image scanned with the machine as a file on the computer. In addition, clicking this button starts the previ- ously specified software.
Page 196
No. Name Description Scan and Mail Click this button to save the image scanned with button the machine as a file on the computer, and attach it to an E-mail message. Clicking this button displays the Scan and Mail dialog box. (=>“Attaching Scanned Images to an E-Mail Message”...
Using LinkMagic Saving Scanned Images as Files An image scanned with the machine can be saved as a file on the computer. In addition, the previously specified software can be started. For details on the settings available in the Scan Image dialog box and the Scan Document dialog box, refer to “Description of the Scan Image/Scan Document Dialog Boxes”...
Page 198
For details on the available TWAIN driver settings, refer to the Printer/ Copier/Scanner User’s Guide on the Documentation CD/DVD. In the “Destination” group box, specify the settings for saving the scanned image. When “Advanced” is selected, the TWAIN driver starts up. However, clicking the Scan Image or Scan Document dialog box allows the set- tings in the “Destination”...
Description of the Scan Image/Scan Document Dialog Boxes Using LinkMagic...
Page 200
Name Description “Scanner Settings” Select the settings for scanning the image. group box “Basic/Advanced” Select the general scan setting. list If “Basic” is selected, specify basic settings from the “Original Size”, “Scan Type”, and “ADF” lists. If “Advanced” is selected, detailed settings can be specified from the TWAIN driver dialog box that appears.
Page 201
Name Description “ADF” list Select whether a single-sided or double-sided document is to be scanned. Choices: ADF (Single), ADF (Duplex) Default: ADF (Single) When duplex page is scanned from ADF, first page is surface and second page is back side of it. When document is not set on the ADF, this setting will be ignored.
Page 202
\Documents and Settings\[Login user name] \My Documents\KONICA MINOLTA\LinkMagic for bizhub C20\MyData (For Windows Vista) \Users\[Login user name]\Documents\KONICA MINOLTA\LinkMagic for bizhub C20\MyData “Save as multi- Select this check box to save the file in a page file” check multi-page format when images are scanned continuously with the ADF.
Name Description “Send the scanned Select this check box to start up the specified image to this applica- software and open the scanned image file after tion.” check box the image is scanned. Default: Unchecked “Program Path” text box Specify the software to be used to open the scanned image.
Page 204
Select “Local Scanner (USB)” or “Network Scanner” for the connected scanner, and then click OK button. The Scan to Clipboard dialog box appears. From the “Basic/Advanced” list in the “Scanner Settings” group box, select the general scan setting. - If “Basic” is selected, scans will be produced with the basic settings. In the “Scanner Settings”...
Page 205
Click the Scan button. Scanning begins, and the image is displayed on the right side of the dia- log box. To select the area of the image to be copied, click the Select Area button, and then drag the pointer to select the area to be copied. To cancel selection of the selected area, click the Delete Selection button.
Description of the Scan to Clipboard Dialog Box Name Description “Scanner Settings” Select the settings for scanning the image. group box “Basic/Advanced” Select the general scan setting. list If “Basic” is selected, specify basic settings from the “Original Size” and “Scan Type” lists. If “Advanced”...
Page 207
Name Description “Original Size” list Select the size of the document. These settings are available when “Basic” is selected in the “Basic/Advanced” list. If “Custom Size” is selected, a new paper size setting can be added from the Custom Size Set- ting dialog box that appears.
Page 208
Name Description Cancel button Click this button to close this dialog box without saving the changes to the settings. Help button Click this button to display the Help. Using LinkMagic...
Attaching Scanned Images to an E-Mail Message An image scanned with the machine can be saved as a file on the computer, and attached to an E-mail message. This operation is compatible with the following E-mail applications. - Microsoft Outlook Express ver.6.0 - Microsoft Outlook 2000/2003/XP/2007 - EUDORA 7.0.1 - Netscape Messenger 7.1...
Page 210
From the “Basic/Advanced” list in the “Scanner Settings” group box, select the general scan setting. - If “Basic” is selected, scans will be produced with the basic settings. In the “Scanner Settings” group box, select the document size from the “Original Size”...
Description of the Scan and Mail Dialog Box Name Description “Scanner Settings” Select the settings for scanning the image. group box “Basic/Advanced” Select the general scan setting. list If “Basic” is selected, specify basic settings from the “Original Size” and “Scan Type”, and “ADF” lists.
Page 212
Name Description “Original Size” list Select the size of the document. These settings are available when “Basic” is selected in the “Basic/Advanced” list. If “Custom Size” is selected, a new paper size setting can be added from the Custom Size Set- ting dialog box that appears.
Page 213
Browse button. Range: Up to 255 characters Default: (For Windows XP/Server 2003/2000) \Documents and Settings\[Login user name] \My Documents\KONICA MINOLTA\LinkMagic for bizhub C20\MyData (For Windows Vista) \Users\[Login user name]\Documents\KONICA MINOLTA\LinkMagic for bizhub C20\MyData Using LinkMagic...
Page 214
Name Description “Size Limit” list Select the limit for the file size of images to be attached to E-mail messages. If “Custom” is selected, a new size limit setting can be added from the Custom Size Settings [Size Limit] dialog box that appears. If “Basic”...
Page 215
Name Description “Program Path” list Select the E-mail application from the list. E-mail applications installed on the computer are automatically searched for and added to the list. To browse to software on the computer, click the Browse button. An E-mail application bundled with Windows is automatically selected.
Printing Scanned Images An image scanned with the machine can be printed from a printer. For details on the settings available in the Scan and Print dialog box, refer to “Description of the Scan and Print Dialog Box” on page 194. In the “Scan Modes”...
Page 217
In the “Printer Settings” group box, specify the settings for printing the scanned image. When “Advanced” is selected, the TWAIN driver starts up. However, clicking the Scan and Print dialog box allows the settings in the “Printer Settings” group box to be changed. Click the Start button.
Description of the Scan and Print Dialog Box Name Description “Scanner Settings” Select the settings for scanning the image. group box “Basic/Advanced” Select the general scan setting. list If “Basic” is selected, specify basic settings from the “Original Size”, “Scan Type”, and “ADF” lists. If “Advanced”...
Page 219
Name Description “Original Size” list Select the size of the document. These settings are available when “Basic” is selected in the “Basic/Advanced” list. If “Custom Size” is selected, a new paper size setting can be added from the Custom Size Set- ting dialog box that appears.
Page 220
Name Description “Printer Settings” group Specify the settings for printing the scanned image. “Centered on If this check box is selected while “Manual” is Page” check box selected below “Scaling”, the image will be printed at the center of the printable area. Default: Checked “Paper Size”...
Page 221
Name Description “Copies” text box Specify the number of copies to be printed. The number of copies can be set between 1 and 99. The default setting is “1”. Reprint button The image that had just been printed can be printed again.
Registering Frequently Used Software Frequently used software can be registered with launcher buttons. Clicking a launcher button starts up the registered software. The launcher buttons are automatically programmed with the following software if they are installed on the computer. - Microsoft Word 2000/XP/2003/2007 - Microsoft Excel 2000/XP/2003/2007 - Microsoft PowerPoint 2000/XP/2003/2007 - PaperPort 10 SE/11 SE...
Page 223
The Launcher Button Setting dialog box appears. In the “Name” text box, type the name of the button. – A maximum of 30 characters can be entered. In the “Path” text box, type the path to the software to be registered. –...
Settings Dialog Box Clicking the Settings button in the main window displays the Settings dialog box. Push To Scan Tab No. Item Description Assigned link to Select the button for the function to be assigned Start—Color key to the Start—Color key on the machine. Default: Scan Image Assigned link to Select the button for the function to be assigned...
Launcher Tab Item Description Settings button Clicking this button to display the settings dia- log box for the button selected in the “Launcher Buttons List”. (=>“Registering Frequently Used Software” on page 198) Initial Settings button Click this button to return all settings to their defaults.
Other Tab Item Description “Run automatically at Win- Select this check box to automatically start dows startup.” check box LinkMagic when the computer is started up. Default: Checked Default button Click this button to return all settings to their defaults. Settings Dialog Box...
Uninstalling LinkMagic You must have administrator privileges in order to uninstall the LinkMagic. If the User Account Control window appears when uninstalling on Windows Vista, click the Allow button or the Continue button. The LinkMagic can be uninstalled using either of the following two methods. - From Control Panel, use “Add or Remove Programs”...
Troubleshooting Symptom Solution Constraint processing is Constraint processing may not be applied not applied by the printer depending on the specified settings. driver when the Scan and Print operation is per- formed. Troubleshooting...
About Local Setup Utility (LSU) By installing Local Setup Device (LSU) onto a computer connected to the machine, you can change machine settings and check the counters and machine status from the computer. The following operations can be performed using LSU. Save speed dialing, group dialing and favorite information onto a com- puter Change speed dialing, group dialing and favorite information...
The printer driver for this machine and the TWAIN driver must be installed on the computer. Installing LSU You must have administrator privileges in order to install the LSU. If the User Account Control window appears when installing on Windows Vista, click the Allow button or the Continue button. Insert Applications CD/DVD in your CD/DVD-ROM drive.
The installation of LSU is completed. Starting Up LSU Click the Start button, point to “All Programs (Windows 2000: Programs)”, “KONICA MINOLTA”, “bizhub C20”, “LSU”, and then click “KONICA MINOLTA bizhub C20 LSU”. The main window of LSU appears. LSU Operating Environment...
Main LSU Window No. Name Description Connect button Click this button to connect the machine with the computer. Disconnect button Click this button to cut the connection between the machine and the computer. Upload button Click this button to send the settings file to the machine.
Downloading Information from the Machine Click to download information from the machine. Uploading Information to the Machine Click to send information to the machine. Dial Import/Dial Export The items of speed dial, group dial, and favorite can be imported when “File” - “Dial Import”...
Registering Dialing Settings This section provides descriptions on the settings that appear for speed dial- ing, group dialing, favorites and machine information. Programming a Speed Dial Number Click beside “Dial Registration”, and then click beside the “Speed Dial”. To register a fax or e-mail destination, click beside “Fax/E-mail”.
In the Register Speed Dial dialog box for the selected number, specify the desired settings. To register a fax or e-mail destination, refer to “Adding a Speed Dial Number (Fax/E-mail)” on page 212. To register an FTP or SMB destination, refer to “Adding a Speed Dial Number (Scan To Server)”...
When registering speed dial numbers to a group, select from “Add Group” list. These speed dial numbers cannot be added to groups registered with an e-mail address. To edit a group dial, refer to “Programming/Editing a Group Dial” on page 216. Click the OK button.
Adding a Speed Dial Number (Scan To Server) The following procedures describe how to register FTP or SMB destinations as speed dial numbers. For FTP transmissions Click the New Registration button. Select “FTP”. Specify the necessary information. Click the OK button. The registered speed dial number appears in the “Dial Registration”...
For SMB transmissions Click the New Registration button. Select “SMB”. Specify the necessary information. Click the OK button. The registered speed dial number appears in the “Dial Registration” list. Editing a Speed Dial Number Select the speed dial number to be edited. Click the Edit button.
Programming/Editing a Group Dial The following procedure describes how to edit the name of a group. Program group dialing after programming speed dial numbers. Add or delete destinations from group dialing by changing the set- tings for the registered speed dial destinations. For details, refer to “Editing a Speed Dial Number”...
Specify the name of the group. Click the OK button. Editing of the group name is completed. Registering to Favorites This section provides details on registering speed dial numbers and group dial in the Favorite list. Frequently used speed dial numbers and group dial destinations can be registered in the Favorite list.
Page 242
From the list, select the destination to be registered, and then click the OK button. The registered destination appears in the “Dial Registration” list. To delete a destination from the Favorite list, select the desired desti- nation, and then click the Delete button. Registering Dialing Settings...
Printing the List of Speed Dial, Group Dial and Favorite The settings specified on the machine for speed dialing, group dialing and favorites can be printed. Click “Print” on the “File” menu. Select Print Item dialog box appears. From the Select Print Item dialog box, select the list to be printed. –...
Displaying Machine Information The settings downloaded from the machine can be displayed. These settings can be used to view the counters or check the machine information. Checking the Total Counter Click beside “Machine Information” menu, and then click “Total Counter”. The Total Counter dialog box appears.
Windows Vista, click the Allow button or the Continue button. Click the Start button, point to “All Programs (Windows 2000: Programs)”, “KONICA MINOLTA”, “bizhub C20”, “LSU”, and then click “Uninstall”. Follow the on-screen instructions. When the following dialog box appears, the uninstallation is completed.
Troubleshooting Symptom Solution It takes a long time to Wait until it can be accessed. access the printer driver when LSU has established a connection to the machine. Troubleshooting...
Installing Printer Utilities on Windows You must have administrator privileges in order to install the Printer Utilities. If the User Account Control window appears when installing on Windows Vista, click the Allow button or the Continue button. Before proceeding with the installation, be sure to exit all running applications.
NETWORK SETTING Menu Location within the Configuration Menu menu is accessible only by the admin- ADMIN. MANAGEMENT istrator. To display the settings for this menu, press to display , and press select key to display UTILITY MACHINE SETTING and then select , use the keypad to type in the ADMIN MANAGEMENT...
Page 253
FTP SERVER FTP TX BONJOUR DYNAMIC DNS RAW PORT DISABLE/ ENABLE BIDIRECTIONAL SNMP WSD PRINT IPSEC NETWORK SETTING Menu...
Page 254
IP ADDR. FIL- ACCESS PER. ACCESS REFUSE IPv6 DISABLE/ ENABLE AUTO SETTING LINK LOCAL GLOBAL ADDRESS GATEWAY ADDRESS NETWARE APPLETALK SPEED/DUPLEX IEEE802.1X E-MAIL SETTING SMTP SENDER NAME NETWORK SETTING Menu...
Page 255
E-MAIL ADDRESS DEFAULT SUB- JECT SMTP SERVER ADDR. SMTP PORT NO. SMTP TIMEOUT TEXT INSERT POP BEFORE DISABLE/ SMTP ENABLE POP3 SERVER ADDR. POP3 PORT NO. POP3 TIMEOUT POP3 ACCOUNT POP3 PASSWORD NETWORK SETTING Menu...
Page 256
SMTP AUTH. DISABLE/ ENABLE SMTP USER NAME SMTP PASSWORD LDAP SETTING DISABLE/ENABLE LDAP SERVER ADDR. LDAP PORT NO. SSL SETTING SEARCH BASE ATTRIBUTE SEARCH METHOD LDAP TIMEOUT MAX. SEARCH RESULTS AUTHENTICATION NETWORK SETTING Menu...
Page 257
LDAP ACCOUNT LDAP PASSWORD DOMAIN NAME CAMERA DIRECT USB SETTING COMM. SETTING USER SETTING AUTO REDIAL SUPPLIES REPLACE NETWORK SETTING Menu...
Accessing the Network Setting Menu Use the following series of keystrokes at the printer to access the Network Setting menu options on your printer. This menu provides access to all of the configurable network items. Press this (until) the message window reads . . . key .
Using the Network Setting Menu Options If the printer is connected to a network, the following settings should be spec- ified. For details about each setting, contact your network administrator. To manually specify settings for the IP address, subnet mask and gateway, set IP ADDR.
Range (If IP ADDR. SETTING is set to SPECIFY) 0-255 for each xxx triplet Use the keypad to input each number; use the and ) keys to move between triplets. Notes A single digit number, such as “1”, cannot be input as “001”. Align the number on the left and input “1”...
Notes A single digit number, such as “1”, cannot be input as “001”. Align the number on the left and input “1” as “1 _ _”. Use and ) keys to move between triplets. The Back key can also be used for deleting. To cancel SPECIFY menu, press the Back key twice after all settings have been cleared.
ARP/PING Purpose If the IP address cannot be acquired due to the DHCP or BOOTP address and if a fixed IP address cannot be acquired, the destination IP address of the ICMP (Ping) packet previously received by the machine can be acquired as the IP address of the machine.
FTP TX Purpose Select whether or not to enable FTP client. If ENABLE is selected, FTP client is enabled. If DISABLE is selected, FTP client is disabled. Options DISABLE/ENABLE Default ENABLE Purpose Select whether or not to enable SMB. If ENABLE is selected, SMB is enabled. If DISABLE is selected, SMB is disabled.
Purpose Select whether or not to enable IPP. If ENABLE is selected, IPP is enabled. If DISABLE is selected, IPP is disabled. Options DISABLE/ENABLE Default ENABLE RAW PORT DISABLE/ENABLE Purpose Select whether or not to enable Raw port. If ENABLE is selected, Raw port is enabled. If DISABLE is selected, Raw port is disabled.
SNMP Purpose Select whether or not to enable SNMP. If ENABLE is selected, SNMP is enabled. If DISABLE is selected, SNMP is disabled. Options DISABLE/ENABLE Default ENABLE WSD PRINT Purpose Select whether or not to enable WSD print. If ENABLE is selected, WSD print is enabled. If DISABLE is selected, WSD print is disabled.
ACCESS REFUSE Purpose Select whether or not to enable Access Refuse transmis- sions. When ENABLE is selected, Access Refuse transmissions are enabled. When DISABLE is selected, Access Refuse transmissions are disabled. Options DISABLE/ENABLE Default DISABLE IPv6 DISABLE/ENABLE Purpose Select whether or not to enable IPv6. If ENABLE is selected, IPv6 is enabled.
NETWARE Purpose Select whether or not to enable NetWare. If ENABLE is selected, NetWare is enabled. If DISABLE is selected, NetWare is disabled. Options DISABLE/ENABLE Default DISABLE APPLETALK Purpose Select whether or not to enable AppleTalk. If ENABLE is selected, AppleTalk is enabled. If DISABLE is selected, AppleTalk is disabled.
Network Connection Theory To connect your printer in a TCP/IP network environment, you must make sure that the internal net- work addresses in the printer have been set. In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a gateway (router) address, depend-...
Making the Connection Ethernet Interface An RJ45 connector can be used as the Ethernet interface for this printer. When connecting your printer to an Ethernet network, the tasks you perform depend on how you plan to set the printer’s IP (Internet Protocol) address. IP Address—A unique identifier for each device on a TCP/IP network.
Setting the Address Manually You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (See chapter 5, “Understanding the Network Setting Menu,” for more information.) When the IP address is changed, add a new port or reinstall the printer driver.
Page 273
SPECIFY ) IP ADDRESS SUBNET MASK GATEWAY IP ADDRESS :0. 0. 0. 0 Use the keypad to input each number. A single digit number, such as “1”, cannot be input as “001”. Align the num- ber on the left and input “1” as “1 _ _”. Use the * and ) keys to move between triplets.
Page 274
GATEWAY :0. 0. 0. 0 Use the keypad to input each number. A single digit number, such as “1”, cannot be input as “001”. Align the num- ber on the left and input “1” as “1 _ _”. Use the * and ) keys to move between triplets.
Network Printing Network printing terms are described below: Apple Talk Bonjour BOOTP Dynamic DNS DHCP HTTP IEEE802.1X IPsec IPv6 IPX/SPX LDAP LPD/LPR POP Before SMTP Port 9100 SMTP SMTP Authentication SNMP TCP/IP WSD print This section contains descriptions of these network printing terms. AppleTalk A generic name for the protocol suite developed by Apple Computer for com- puter networking.
Bonjour Macintosh network technology for automatically detecting devices connected to the network and for specifying settings. Previously called “Rendezvous”, the name was changed to “Bonjour” starting with Mac OS X v10.4. BOOTP BOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to discover (1) its own IP address, (2) the IP address of a BOOTP server on the network, and (3) a file that can be loaded into memory to boot the workstation.
Abbreviation for File Transfer Protocol. A protocol for transferring files over the Internet or an intranet on the TCP/IP network. HTTP HTTP (HyperText Transfer Protocol) is the underlying protocol used by the World Wide Web. It defines how messages are formatted and transmitted, and what actions web servers and browsers should take in response to vari- ous commands.
IPX/SPX IPX/SPX (Internetwork Packet Exchange/Sequenced Packet Exchange) is a networking protocol developed by Novell. It was used mainly in Netware envi- ronments as the general LAN protocol, where TCP/IP has become wide- spread. LDAP On a TCP/ IP network, such as the Internet or an intranet, LDAP (Lightweight Directory Access Protocol) is a protocol that is used to access a database for managing environment information and the e-mail addresses of network users.
Traditionally, in order to locate services on the network, users had to supply the host name or network address of the machine providing the desired ser- vice. This has created many administrative problems. However, SLP (Service Location Protocol) simplifies the discovery and use of network resources such as printers by automating a number of network ser- vices.
SMTP Authentication Specification that adds user authentication functions to SMTP, which is used for sending E-mail. When sending E-mail, authentication of the user is performed by the SMTP server, and the E-mail message is permitted to be sent only if authentication was successful.
Printing via IPP (Internet Printing Protocol) You must have administrator privileges in order to install the printer driver. If the User Account Control window appears when installing on Windows Vista/7/Server 2008, click the Continue button or the Yes button. Adding an IPP Port using the Drivers CD/DVD For IPP printing, specify the network setting.
Page 282
[Update List]: To update the printer information, click this button. Select Internet Printing as the printing method from the pull-down list, and then click Next. In the Confirm Installation Settings dialog box, click Install. [Installation Settings]: To change the settings, click this button. Network Printing...
Click Finish. This completes the installation of the printer driver. Adding an IPP Port using Add Printer Wizard – Windows Server 2003/XP/2000 For Windows Server 2003/XP: Click Start, select Printers and Faxes, and then click Add Printer. For Windows 2000: Click Start, point to Settings, click Printers, and then click Add Printer.
Page 284
Windows 2000—If you entered a valid path in the previous step, the fol- lowing message displays: “The server on which the KONICA MINOLTA bizhub C20 printer resides does not have the correct printer driver installed. If you want to install the driver on your local computer, click OK.”...
Adding an IPP Port using Add Printer Wizard – Windows Vista/7/Server 2008 Click Start, click Control Panel, and then click Printers. When using Windows 7, View devices and printers under Hard- ware and Sound. Click Add a printer. In the dialog box click Add a network, wireless or Bluetooth printer. In the dialog box, click The printer that I want isn’t listed.
Page 286
In the URL field in the next dialog box enter the printer’s network path- name in one of the following formats and then choose Next: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp If your system cannot connect to the machine, the following message appears: “Windows cannot connect to the printer. Make sure that you have typed the name correctly, and that the printer is connected to network.”...
Printing via Web Service Print Function In Windows Vista/7/Server 2008, printers on the network that support Web Service print can be detected and installed. You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications.
Turn on the power of the machine while it is connected to the network. Since the printer is searched for, be sure to connect the machine to the network. To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Center] on the computer.
Page 289
To use Web Service print, check that Network discovery is enabled in Network and Sharing Center on the computer. Insert the Drivers CD/DVD in the CD-ROM/DVD drive of your computer. The installer starts up. Exit the installer. Click Start, and then click Network. The Network window appears, showing the computers and devices on the network.
Page 290
Click Browse my computer for driver software (advanced). Click Browse, locate the directory on the CD/DVD where the printer driver files are located (for example : Windows\Printer Driver\color\ Drivers\Win_x86\PS\English), and then click OK. Click Next. Click Close. Network Printing...
Adding a printer using Add Printer Wizard In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer after connecting this machine. In Windows 7, a window for specifying an installation disk does not appear after the machine is connected to the computer.
Page 292
Click Create a new port, and then select Standard TCP/IP port. Click Next. Select Web Services Device and type the IP address for the printer, and then click Next. The Found New Hardware Wizard dialog box appears. Network Printing...
Page 293
Click Locate and install driver software (recommended). Click Browse my computer for driver software (advanced). Network Printing...
Page 294
Click Browse, locate the directory on the CD/DVD where the printer driver files are located (for example : Windows\Printer Driver\color\ Drivers\Win_x86\PS\English), and then click OK. Click Next. Click Close. Click Next. Network Printing...
Page 295
Select whether the printer driver is to be shared, and then click Next. Click Finish. This completes the installation of the printer driver. Network Printing...
Updating the driver after connecting this machine In Windows 7, if this machine is connected without first installing the printer driver, the printer driver will not be correctly identified. If the printer driver is not correctly identified, the driver must be updated using [Update Driver]. Insert the Printer Driver CD/DVD in the CD-ROM/DVD drive of your com- puter.
Page 297
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Device and Printer] window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver updating. In Windows Vista/Server 2008, [Update Driver...] is also available. In Windows Vista/Server 2008, you can specify [Update Driver...] by opening [Properties] for this machine that is listed in [Other Devices] under [Device Manager].
If the bit number differs between the server operating system and client operating system If the bit number differs between the print server's running operating system and client computer's running operating system while Windows Server 2008 is running on the print server, the additional driver may not be installed cor- rectly on the print server.
Installing the Additional Driver As an example, the following procedure describes the operations performed when Windows Server 2008 (32 bits) is running on the print server and Win- dows Vista (64 bits) is running on the client computer. Specify the client computer (64 bits) drive installed with the operating sys- tem (normally, drive C) as a shared drive.
Page 300
Right-click the printer that was installed, and then click the appropriate menu command to display printer properties. Select the Sharing tab, and then select the Share this printer check box. Click Additional Drivers. The Additional Drivers dialog box appears. Under Processor, select the x64 check box, and then click OK. Network Printing...
Page 301
Specify the folder containing the driver for a 64-bit operating system. A dialog box appears, requesting the location of the setup information file. Click Browse, and then select the setup information file (ntprint.inf) on the client computer mapped as a network drive. This setting is available for only PostScript driver.
Troubleshooting Symptom Action Some client functions are Install the printer driver directly on the client not available with the Point computer. and Print feature when the server is running Windows Server 2008/Server 2003/ 2000 and the client com- puter is running Windows 7/Vista/XP/2000.
About PageScope Web Connection This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Pro- tocol)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most fre- quently used printer configuration options.
A network, to which both your PC and the printer are connected You cannot access PageScope Web Connection using a local (USB) connection. When connecting with Windows Server 2008 When PageScope Web Connection is started on a computer running Win- dows Server 2008, only the System tab may appear, and the Job, Print and Network tabs may not.
Through the assigned name of the printer—This name comes from the IP host table (the filename is hosts) on the computer system and is usually assigned by the system administrator (for example, bizhub C20). It may be more convenient for you to use the printer name than the IP address.
Internet Explorer (version 6.0 for Windows) Start Internet Explorer. From the Tools menu choose Internet Options. Select the Connections tab on the dialog box. Choose the LAN Settings button to display the Local Area Network (LAN) Set- tings dialog box. Select Advanced in Proxy server to open the Proxy Set- tings dialog box.
Page 308
Enter the printer name or IP address in the URL Location box to access the printer home page. http://192.168.1.2/ Setting Up the Printer Web Page...
Connection Window The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Link to Links to main Current Printer name KONICA MINOLTA topics web site Version information Click to logout of...
Current Status The current status of the printer is displayed at the top of all PageScope Web Connection windows. The icon displays the type of status being displayed. Icon Status Description Examples Ready The printer is online READY and either ready to PRINTING print or printing.
Logging on to PageScope Web Connection Login Page User authentication and language settings can be specified by using PageScope Web Connection. In order to perform authentication, you must log on in Administrator Mode. For details on authentication, refer to “Authenti- cation”...
Language Setting If necessary, the display language used for Web Connection can be changed. Public User Mode In Public User Mode, you can view configuration settings but not change them. Select Public User. Click the Log in button. Registered User Mode In Registered User Mode, you can view configuration settings but not change them.
Type in the user name and user password in the User Name and User Password text boxes. Click the Log in button. Administrator Mode In order to change any configuration settings through PageScope Web Connection, you must first enter Administrator Mode. Select Administrator.
Viewing Printer Status System Page On this page you find printer status and current configuration settings, printer identification, and links to all other web pages. All of the information displayed on the System page is read only. Viewing Printer Status...
Device Information Summary (previous page) The System - Device Information - Summary window provides the follow- ing information. Item Description Copier RAM Displays the amount of copier memory installed in the machine. Printer RAM Displays the amount of printer memory installed in the machine.
Page 316
Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3 installed on the machine. Paper Size Indicates the size of paper loaded in a specific tray. Paper Type Indicates the type of paper loaded in a specific tray.
Page 317
Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray.
Page 318
Output Tray The System - Device Information - Output Tray window provides the fol- lowing information. Item Description Tray Displays the name of the output tray. Paper Displays the status (Ready, Full) of the output tray. Viewing Printer Status...
Page 319
Storage The System - Device Information - Storage window provides the following information. Item Description Total Displays the total amount of space on the hard disk and CompactFlash card. If no optional storages are installed, “-” are dis- played. Used Displays the amount of space on the hard disk and CompactFlash card that are used.
Page 320
Interface Information Viewing Printer Status...
Page 321
The System - Device Information - Interface Information window provides the following information. Item Description Protocol TCP/IP If Enable is displayed, TCP/IP is enabled. Information If Disable is selected, TCP/IP is disabled. IPv6 If Enable is displayed, IPv6 is enabled. If Disable is selected, IPv6 is disabled.
Page 322
Item Description If Enable is displayed, SLP is enabled. If Disable is selected, SLP is disabled. SMTP If Enable is displayed, SMTP is enabled. If Disable is selected, SMTP is disabled. SNMP If Enable is displayed, SNMP is enabled. If Disable is selected, SNMP is disabled. WSD Print If Enable is displayed, WSD Print is enabled.
Page 323
Item Description Network Type Identifies the type of network interface Information installed on the printer (Ethernet 10Base-T/ 100Base-TX/1000Base-T). Ethernet Speed Indicates the transmission speed for the net- work and the transmission method for bidi- rectional transmission. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface.
Page 324
Consumables The System - Device Information - Consumables window provides the fol- lowing information. Item Description Consumables Identifies the type of consumable that is being moni- tored. Status Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full TYPE...
Counter The System - Counter window provides the following information. Item Description Total Print Indicates the total number of all printed pages. Total Faces Counter, Color Copy, Color Print, Mono Copy, Mono Print, Fax Print, Total Duplex Counter, Duplex Color Copy, Duplex Color Print, Duplex Mono Copy, Duplex Mono Print Normalized...
Page 326
Item Description Scan Counter Indicates the total number of scanned pages. IR, ADFR (Single), ADFR (Duplex) Tray Counter Indicates the total number of pages for each tray setting. Tray 1, Tray 2, Tray 3 (when installed) Paper Size Indicates the total number of pages for each paper size. Counter A4, B5 (JIS), A5, Legal, Letter, Others Paper Type...
Displays the web site address for assistance. Information Product Help Displays the help web site address for machine assistance. Corporate Displays the KONICA MINOLTA corporate web site address. Supplies and Displays the web site address where you can purchase Accessories machine supplies and accessories.
User Authentication This page appears only when logged on to Registered User Mode. User Password Change The password for the user who is logged on can be changed from the Sys- tem - User Authentication - User Password Change page. Item Description User Name...
Page 329
Item Description Apply button Applies the new password. If the password typed in three text boxes doesn’t match, the following message displays when you choose the Apply button: “Password was changed unsuccessfully. Please retry.” Retype the passwords in both text boxes. Clear button Resets all configuration settings to previous values.
Job Page This page allows you to view the status of current print jobs. Active Job List (shown above) The Job - Active Job List window provides the following information for up to 45 print jobs: Item Description Job Number Displays the print job identification number.
Done Job List The Job - Done Job List window provides the following information for up to 50 print jobs: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Print Page This page allows you to check the settings for printing when there is no PDL printer driver. Default Settings General Settings (shown above) The Print - Default Settings - General Settings window provides the follow- ing information. Item Description Indicates default language to be selected.
Page 334
Item Description Copies Indicates the default setting for number of copies to be printed. Paper Size Indicates the default setting for the size of paper. Width Indicates the paper width when Paper Size is set to Custom Size. Length Indicates the paper length when Paper Size is set to Custom Size.
Page 335
Paper Source Settings The Print - Default Settings - Paper Source Settings window provides the following information. Item Description Tray1 Paper Size Indicates the setting for the size of paper loaded into Tray 1. Width Indicates the paper width when Paper Size is set to Custom Size.
Page 336
Item Description Tray2 Paper Size Indicates the setting for the size of paper loaded into Tray 2. Width Indicates the paper width when Paper Size is set to Custom Size. Length Indicates the paper width when Paper Size is set to Custom Size. Paper Type Indicates the setting for the type of paper loaded into Tray 2.
Page 337
Tray Mapping Settings The Print - Default Settings - Tray Mapping Settings window provides the following information. Item Description Tray Mapping Mode If On is indicated, Tray Mapping function is used. If Off is indicated, Tray Mapping function is not used.
Page 338
PCL Settings The Print - Default Settings - PCL Settings window provides the following information. Item Description Font Number Displays the default font in the PCL language. Symbol Set Displays the symbol set used with the PCL lan- guage. Lines Per Page Indicates how many lines are in a page in PCL lan- guage.
Page 339
PS Settings The Print - Default Settings - PS Settings window provides the following information. Item Description Wait Timeout Indicates Postscript timeout. “0” means that no time-out control is effective. PS Protocol Displays the settings for the PS protocol. Print to PS Error Displays whether or not error printing is performed.
Page 340
XPS Settings The Print - Default Settings - XPS Settings window provides the following information. This page appears only if an optional hard disk kit or a CompactFlash card is installed. Item Description Digital Signature Shows whether XPS digital signatures are enabled or disabled.
Page 342
The Print - Default Settings - Print Quality Settings window provides the following information. Item Description Print Color Mode If Color is indicated, the pages are Quality Set- printed in full color. tings If Monochrome is indicated, the pages are printed in black and white. Color Separation If On is indicated, color separation is per- formed.
Page 343
Item Description PS Settings Image/Text/Graphics Identifies the color space for RGB data. Printing (RGB Source) Image/Text/Graphics Indicates the color intent to be used on Printing (RGB Intent) conversion RGB to CMYK by printer. Image/Text/Graphics Indicates the method to reproduce RGB Printing (RGB Gray black and gray.
Page 344
Camera Direct Settings The Print - Default Settings - Camera Direct Settings window provides the following information. Item Description Camera Direct If Enable is indicated, camera direct printing is enabled. Print If Disable is indicated, camera direct printing is disabled. Image Quality Indicates the image quality for camera direct photo print- ing.
Font/Form PCL Font The Print - Font/Form - PCL Font page allows you to check the list of PCL fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the storage source of the font.
Page 346
PS Font The Print - Font/Form - PS Font page allows you to check the list of Post- Script fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the storage source of the font.
Page 347
Form Overlay The Print - Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages. Item Description Number Displays the control number of the overlay. File Name Displays the name of the overlays. Source Displays the storage source of the form overlay.
Page 348
Color Profile The Print - Font/Form - Color Profile page allows you to check the list of color profiles that the printer manages. Item Description Number Displays the control number of the color profile. File Name Displays the file name of the color profile. Profile Name Displays the name of the color profile.
Report Types The Print - Report Types window provides the following information. Item Description Configuration Page Prints the printer configuration page. Utility Map Prints the printer utility map page. PS/PCL Menu Map Prints the printer PS/PCL menu map page. Page PCL Font Page Prints the PCL font lists.
Direct Print The Print - Direct Print page allows you to print a file directly from the printer without starting up the application. This page appears only if an optional hard disk kit or a CompactFlash card is installed This page appears when both Public Access (in the Network - Authentication - User Authentication page) and Print (in the Sys- tem - Authentication - Default Permission Settings) are set to Allow.
Scan Page This page allows you to view the currently specified dial settings. Favorite (shown above) The Scan - Favorite window provides the following information. Item Description Displays the number in the Favorite list. Name Displays the destination name of the selected speed dial number.
Speed Dial Setting The Scan - Speed Dial Setting window provides the following information. Item Description Speed Dial Click to jump to the beginning of the speed dial list within the List same window. Displays the speed dial number. Name Displays the destination name of the speed dial number.
Group Dial Setting The Scan - Group Dial Setting window provides the following information. Item Description Displays the group dial number. Click the number to display the list of destinations registered with the group dial number. Name Displays the name of the group. Address Shows whether the registered group contains fax destina- tions or e-mail destinations.
Configuring the Printer In order to make any configuration changes through PageScope Web Connection, you must first enter Administrator Mode. See “Administrator Mode” on page 289 for instructions on logging into Administrator Mode. System Page This page allows you to configure several user- and printer-specific items. Configuring the Printer...
Device Information Summary (previous page) The System - Device Information - Summary window provides the follow- ing information. Item Description Copier RAM Displays the amount of copier memory installed in the machine. Printer RAM Displays the amount of printer memory installed in the machine.
Page 356
Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3 installed on the printer. Paper Size Indicates the size of paper loaded in a specific tray. Paper Type Indicates the type of paper loaded in a specific tray.
Page 357
Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity of each paper tray.
Page 358
Output Tray The System - Device Information - Output Tray window provides the fol- lowing information. Item Description Tray Displays the name of the output tray. Paper Displays the status (Ready, Full) of the output tray. Configuring the Printer...
Page 359
Storage The System - Device Information - Storage window provides the following information. Item Description Total Displays the total amount of space on the hard disk and CompactFlash card. If no optional storages are installed, “-” are dis- played. Used Displays the amount of space on the hard disk and CompactFlash card that are used.
Page 360
Interface Information Configuring the Printer...
Page 361
The System - Device Information - Interface Information window provides the following information. Item Description Protocol TCP/IP If Enable is displayed, TCP/IP is enabled. Information If Disable is selected, TCP/IP is disabled. IPv6 If Enable is displayed, IPv6 is enabled. If Disable is selected, IPv6 is disabled.
Page 362
Item Description If Enable is displayed, SLP is enabled. If Disable is selected, SLP is disabled. SMTP If Enable is displayed, SMTP is enabled. If Disable is selected, SMTP is disabled. SNMP If Enable is displayed, SNMP is enabled. If Disable is selected, SNMP is disabled. WSD Print If Enable is displayed, WSD Print is enabled.
Page 363
Item Description Network Type Identifies the type of network interface Information installed on the printer (Ethernet 10Base-T/ 100Base-TX/1000Base-T). Ethernet Speed Indicates the transmission speed for the net- work and the transmission method for bidi- rectional transmission. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface.
Page 364
Consumables The System - Device Information - Consumables window provides the fol- lowing information. Item Description Consumables Identifies the type of consumable that is being moni- tored. Status Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full TYPE...
Counter The System - Counter window provides the following information. Item Description Total Print Indicates the total number of all printed pages. Total Faces Counter, Color Copy, Color Print, Mono Copy, Mono Print, Fax Print, Total Duplex Counter, Duplex Color Copy, Duplex Color Print, Duplex Mono Copy, Duplex Mono Print Normalized Total Faces The number of printed pages is displayed calculated...
Page 366
Item Description Fax Counter Indicates the total number of fax transmission and reception pages. Tx (Transmission) Counter, Rx (Reception) Counter Scan Counter Indicates the total number of scanned pages. IR, ADFR (Single), ADFR (Duplex) Tray Counter Indicates the total number of pages for each tray setting.
Product Help URL Sets the help web site address for printer assis- tance. Range: Up to 127 characters Default: http://pagescope.com Corporate URL Sets the KONICA MINOLTA corporate web site address. Range: Up to 127 characters Default: http://konicaminolta.com Configuring the Printer...
Page 368
Item Description Supplies and Accesso- Sets the web address where you can purchase ries printer supplies and accessories. Range: Up to 127 characters Default: [Blank] Contact Phone Number Specifies the telephone number of the printer administrator. Range: Up to 31 characters Default: [Blank] Contact Address Specifies the address of the printer administrator.
Import/Export This page appears only if an optional hard disk kit or a CompactFlash card is installed. Job Log This page appears when Job Log (in the System - Machine Settings page) is set to Enable. The System - Import/Export - Job Log window allows you to configure the following items.
Page 370
Item Description Clear button Clears the job log from the device. User Information This page appears when User Authentication (in the Network - Authentication - User Authentication page) is set to On. The System - Import/Export - User Information window allows you to con- figure the following items.
Authentication This page appears if an optional hard disk kit or a CompactFlash card is installed. Default Permission Settings This page appears only if Public Access (in the Network - Authenti- cation - User Authentication page) is set to Allow. The System - Authentication - Default Permission Settings window allows you to configure the following items.
Page 372
User Registration This page appears only if User Authentication (in the Network - Authentication - User Authentication page) is set to On. The System - Authentication - User Registration window allows you to configure the following items. Item Description Search for Number Select the user registration number (No.) to be searched for.
Page 373
User Registration (New Registration) Configuring the Printer...
Page 374
The System - Authentication - User Registration - New Registration win- dow allows you to configure the following items. Item Description User Shows the new user registration number (No.). Registration User Name Specify the name of the new user. Range: Up to 64 characters Default: [Blank] A user name that already exists cannot be specified.
Item Description Cancel button Click to cancel the entered data and return to the System - Authentication - User Registration page. Date/Time Manual Settings The System - Date/Time - Manual Settings window allows you to configure the following items: Item Description Year Specifies the year for the printer’s internal clock.
Page 376
Item Description Month Specifies the month for the printer’s internal clock. Range: 1 - 12 Default: 1 Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - USER SETTING - DATE&TIME Specifies the day for the printer’s internal clock. Range: 1 - 31 Default: 1 Configuration Menu Equivalent: UTILITY - ADMIN.
Page 377
Time Adjustment Settings The System - Date/Time - Time Adjustment Settings window allows you to configure the following items: Item Description Time Adjustment Select whether or not the time is automatically adjusted with NTP. Choices: Enable, Disable Default: Disable NTP Server Address Specifies the NTP server address.
Page 378
Item Description Adjustment Time Shows the last modification date and time. Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer...
Admin Password The System - Admin Password window allows you to configure the follow- ing items: Item Description Current Password Type in the current password. Range: Up to 16 characters Default: [Blank] New Password Sets a new password to enter Administrator Mode. Range: Up to 16 characters Default: [Blank] Passwords can be set to any string of...
Page 380
Item Description Retype New Password Verifies the new password typed in the New Pass- word text box. Range: Up to 16 characters Default: [Blank] If the password typed in three text boxes doesn’t match, the following message dis- plays when you choose the Apply button: “Password was changed unsuccessfully.
Save Settings From the System - Save Settings window, the machine settings can be saved as a file on the computer being used. In addition, the saved settings file can be read by the machine. The following settings are not saved in the file: - Phone books Item Description...
Machine Settings The System - Machine Settings window allows you to configure the follow- ing items: Item Description Administrator Name Specifies the name of the administrator for the printer. Range: Up to 127 characters Default: [Blank] Device Name Specifies the name of the printer. Range: Up to 127 characters Default: [Blank] Device Location...
Page 383
Item Description Do Startup Page Selects whether or not a startup page is printed when the printer is turned on. Choices: On, Off Default: Off Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - STARTUP OPTIONS - DO STARTUP PAGE Auto Continue Selects whether or not printing continues if the size...
Page 384
Item Description Grayscale Page Specify the operation to be performed for black-and-white pages in a job specified for color printing. If Auto is selected, printing is automatically per- formed according to the first page of the job. If Grayscale Print is selected, black-and-white printing is automatically performed depending on each page.
ROM Version The System - ROM Version window provides the following information. Item Description Engine ROM Version Displays the ROM version of the printer engine. Controller ROM Ver- Displays the ROM version of the controller. sion PS/PCL Controller Displays the ROM version of the PS/PCL printer ROM Version controller.
Maintenance Clear Settings The System - Maintenance - Clear Settings page allows you to reset the printer settings to its factory defaults. Item Description Printer Settings Resets the printer settings to their defaults. Network Settings Resets the network settings to their defaults. All Settings Resets all settings to their defaults.
Page 387
Reset Printer The System - Maintenance - Reset Printer page allows you to reset the printer controller. Item Description Reset button When clicked, the message “Is it OK to reset the Printer?” appears. Click OK to automatically restart the printer. Configuring the Printer...
Status Notification Settings Configuring the Printer...
Page 389
The System - Status Notification Settings window allows you to configure the following items: Item Description IP Address Notification Specify the IP address of the SNMP trap Address receiver. An IPv4 or IPv6 address or a host name can be specified. Range: Up to 63 characters Default: 0.0.0.0 Port Num-...
Page 390
Item Description Alert Paper Empty Specifies whether or not a notification is sent when the paper tray runs out of paper. Choices: Enable, Disable Default: Enable Paper Jam Specifies whether or not a notification is sent when a paper misfeed occurs. Choices: Enable, Disable Default: Enable Maintenance...
Page 391
Item Description Job Complete Specifies whether or not a notification is sent when a print job is completed cor- rectly. Choices: Enable, Disable Default: Enable Job Error Specifies whether or not a notification is sent when a job could not be printed because an error occurred.
Job Page This page allows you to view the status of current print jobs. Active Job List (show above) The Job - Active Job List window provides the following information for up to 45 print jobs. Item Description Job Number Displays the print job identification number.
Done Job List The Job - Done Job List window provides the following information for up to 50 print jobs. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job. Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number.
Print Page This page allows more detailed printer settings to be specified. Local Interface The Print - Local Interface window allows you to configure the following items: Item Description I/O Timeout Specifies the reception timeout (in seconds). Range: 5-300 Default: 15 Apply button Applies the configuration settings for this window.
Default Settings General Settings The Print - Default Settings - General Settings window allows you to con- figure the following items: Item Description Selects default language to be selected. Choices: Auto, PCL, PS Default: Auto Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - DEF.
Page 397
Item Description Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the paper for long-edge binding. If Short-Edge Binding is selected, the pages will be printed on both sides of the paper for short-edge binding.
Page 398
Item Description Width Specifies the paper width when Paper Size is set to Custom Size. Range: 3.63 - 8.50 (inch) / 92 - 216 (mm) Default: 8.50 inch/216 mm (U.S. model) 8.27 inch/210 mm (Other model) Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - PAPER - DEFAULT PAPER - CUSTOM SIZE - WIDTH Length...
Page 399
Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Paper Source Settings Configuring the Printer...
Page 400
The Print - Default Settings - Paper Source Settings window allows you to configure the following items: Item Description Tray1 Paper Size Specifies the setting for the size of the paper loaded into Tray 1. Choices: Letter, Legal, Executive, A4, A5, A6, B5 (JIS), B6, Government Letter, Statement, Folio, SP Folio, UK Quarto, Foolscap,...
Page 401
Item Description Length Specifies the paper length when Paper Size is set to Custom Size. Range: 5.83 - 14.00 (inch) / 148 - 356 (mm) Default: 11.69 inch/297 mm Configuration Menu Equivalent: UTILITY - PAPER SETUP - TRAY1 PAPER Paper Type Specifies the setting for the type of the paper loaded into Tray 1.
Page 402
Item Description Tray2 Paper Size Specifies the setting for the size of the paper loaded into Tray 2. Choices: Letter, Executive, A4, A5, A6, B5 (JIS), B6, Government Letter, Statement, UK Quarto, 16K, Photo 4x6, Kai 16, Kai 32, Custom Size Default: Letter (U.S.
Page 403
Item Description Tray3 Paper Size Displays the setting for the size of the paper loaded into Tray 3. This item appears Paper Type Displays the setting for the type of the only if an optional paper loaded into Tray 3. lower feeder unit is installed.
Page 404
Item Description Paper Type Select whether or not the Any Media Type setting is selected for Tray 2. Choices: Off, Any Default: Off Configuration Menu Equivalent: PS/PCL PRINT - PAPER MENU - ANY TRAY SETTING - TRAY2 PAPER - TRAY2 ANY TYPE Tray 3 Paper Type...
Page 405
Tray Mapping Settings The Print - Default Settings - Tray Mapping Settings window provides the following information. Item Description Tray Mapping Mode Select whether or not the Tray Mapping function is used. Choices: On, Off Default: Off Configuration Menu Equivalent: PS/PCL PRINT - PAPER MENU - TRAY MAPPING - TRAY MAPPING MD.
Page 406
Item Description Logical Tray 0-9 Select the tray that is used for printing when a print job is received from another manufacturer’s printer driver. The default setting for Logical Tray 1 is Physical Tray 1. The default setting for all other trays is Physical Tray 2.
Page 407
The Print - Default Settings - PCL Settings window allows you to configure the following items: Item Description Font Number Sets the default font in the PCL language. Range: 0 - 102 Default: 0 Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - FONT NUMBER Symbol Set...
Page 408
Item Description CR/LF Mapping Selects CR/LF code definition in PCL language. Choices: CR=CR LF=LF, CR=CRLF LF=LF, CR=CR LF=LFCR, CR=CRLF LF=LFCR Default: CR=CR LF=LF Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - PCL - CR/LF MAPPING Apply button Applies the configuration settings for this window.
Page 409
PS Settings The Print - Default Settings - PS Settings window allows you to configure the following items: Item Description Wait Timeout Sets Postscript timeout. “0” means that no time-out control is effective. Range: 0 - 300 (in seconds) Default: 0 Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - POSTSCRIPT - WAIT...
Page 410
Item Description Print to PS Error Specifies whether or not error printing is performed. Choices: On, Off Default: Off Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS ERROR PAGE Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 411
The Print - Default Settings - XPS Settings window allows you to configure the following items: Item Description Digital Signature Specify whether to verify digital signature. When Enable is selected, the document without a valid digital signature is not printed. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent:...
Page 412
Print Quality Settings The Print - Default Settings - Print Quality Settings window allows you to configure the following items: Item Description Print Color Mode If Color is selected, the pages are printed in Quality full color. Settings If Monochrome is selected, the pages are printed in black and white.
Page 413
Item Description Color Separation If On is selected, color separation is per- formed. If Off is selected, color separation is not per- formed. Choices: On, Off Default: Off Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - COLOR SEPARATION Brightness Specifies the brightness of the printed image.
Page 414
Item Description Edge Enhance- Select whether image/text/graphics edges ment (Image/Text/ are emphasized. Graphics Printing) If On is selected, the edges are empha- sized. If Off is selected, the edges are not empha- sized. Choices: On, Off Default: Off (Image) On (Text / Graphics) Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - EDGE ENHANCEMENT -...
Page 415
Item Description Contrast Specifies the contrast of the image. Settings Choices: +15%, +10%, +5%, 0, -5%, -10%, -15% Default: 0 Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - PCL SETTING - CONTRAST Image/Text/ Specifies the color space for RGB data. Graphics Printing Choices: Device Color, sRGB (Source)
Page 416
Item Description Image/Text/ Specifies the color space for RGB data. Settings Graphics Printing Choices: Device Color, sRGB, AppleRGB, (RGB Source) AdobeRGB1998, ColorMatchRGB, BlueAdjustRGB, Custom Profile Default: sRGB Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - PS SETTING - IMAGE/ TEXT/GRFX.
Page 417
Item Description Image/Text/ Specifies the ICC destination profile to be Graphics Printing used for printed output. (Destination Pro- Choices: Auto, Custom Profile file) Default: Auto Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - PS SETTING - IMAGE/ TEXT/GRFX. PRINTING - DESTINATION PROF Simulation (Pro- Specifies the specific ICC simulation profile...
Page 418
Item Description Calibration Tone Calibration If On is indicated, image adjustments are Settings applied. If Off is indicated, image adjustments are not applied. Choices: On, Off Default: On Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - CALIBRATION - TONE CALIBRATION Cyan/Magenta/ Specifies the density of the highlight color.
Page 419
Camera Direct Settings The Print - Default Settings - Camera Direct Settings allows you to config- ure the following items: Item Description Camera Direct If Enable is selected, camera direct printing is enabled. Print If Disable is selected, camera direct printing is disabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent:...
Page 420
Item Description Tray1 Paper Select the paper size when using Tray 1 with camera Size direct printing. The available paper sizes differ depending on the selected media type. Choices: Letter, Statement, A4, A5, B5 (JIS), Photo 4x6, Japanese Postcard, Letter 2-up 4x6, A4 4-up L Size, A4 2-up 10x15 Default: Letter (U.S.
Item Description N-up Layout Select the number of images printed on a single sheet of media. If 1-up is selected, only one image will be printed on a sin- gle sheet of media. Choices: 1-up, 2-up, 3-up, 4-up, 6-up, 8-up Default: 1-up Configuration Menu Equivalent: UTILITY - DIRECT PRINT - N-UP LAYOUT...
Page 422
The Print - Download Font/Form - PS Font window allows you to configure the following items: Item Description Download PS Radio button Specifies the download destination (HDD/ Font Memory Card) of the font. Text box Specifies the file name for the PostScript font to be downloaded.
Page 423
The Print - Download Font/Form - Form Overlay window allows you to configure the following items: Item Description Download Form Radio button Specifies the download destination (HDD/ Overlay Memory Card) of the form overlay file. Text box Specifies the file name for the form over- lay to be downloaded.
Page 424
The Print - Download Font/Form - Color Profile window allows you to con- figure the following items: Item Description Download Color Radio button Specifies the download destination (HDD/ Profile Memory Card) of the color profile. Text box Specifies the file name for the color profile to be downloaded.
Scan Page On the Scan page, settings for the destination information to be registered in the machine and the fax and scan transmission/reception settings can be specified. Favorite (shown above) The Scan - Favorite page, settings for speed dial and group dial can be specified.
Page 426
From Speed Dial The Scan - Favorite - Speed Dial List window allows you to configure the following items. Item Description Speed Dial List Click to jump to the beginning of the No.of speed dial list within the same page. Radio button Select a radio button to select a destination registered in the list.
Page 427
Item Description Clear button Resets all configuration settings for this window to their user defaults. Cancel button Cancels the operation and returns to the Favorite List page. Configuring the Printer...
Page 428
From Group Dial The Scan - Favorite - Group Dial List window allows you to configure the following items: Item Description Radio button Select a radio button to select a destination from the reg- istered list. Default: Cleared Displays the group dial number. Name Displays the name of the group.
Speed Dial Setting The Scan - Speed Dial Setting window, settings for speed dialing can be specified. Item Description Speed Dial List Click to jump to the beginning of the speed dial list within the same page. Speed Dial number of 001 - 220 are Fax and E-mail des- tinations.
Page 430
Item Description Displays the number in the speed dial list. Click a speed dial number where no destination is registered to add a destination from the Speed Dial Registration page. If a destination is already registered with the speed dial number that is clicked, the registered information can be edited.
Page 431
Speed Dial Registration The Scan - Speed Dial Setting - Speed Dial Registration window, select the type of Speed dial destination to be added. Item Description Speed Registration From the drop-down list, select the type of speed dial destination to be added. If “Fax”...
Page 432
Fax Destination The Scan - Speed Dial Setting - Fax Destination window allows you to con- figure the following items: Item Description Destination Name Specify the name of the destination. Range: Up to 20 characters. Default: [Blank] Destination Specify the fax number for the destination. Number Range: Up to 50 characters...
Page 433
E-mail Destination The Scan - Speed Dial Setting - E-mail Destination window allows you to configure the following items: Item Description Destination Name Specify the name of the destination. Range: Up to 20 characters. Default: [Blank] Destination Specify the E-mail address of the destination. Address Range: Up to 64 characters...
Page 434
LDAP Search The Scan - Speed Dial Setting - LDAP Search window allows you to config- ure the following items: Item Description LDAP Search Specify the method for searching for the destination. Choices: Name, E-mail Default: Name LDAP Search Specify the LDAP search string. String Range: Up to 20 characters...
Page 435
Speed Dial Registration (Scan to Server) On the Scan - Speed Dial Setting - Speed Dial Registration page, select the server type of speed dial destination to be added. Item Description Speed Dial From the drop-down list, select the type of speed dial Registration destination to be added.
Page 436
For FTP Server Configuring the Printer...
Page 437
The Scan - Speed Dial Setting of speed dial registration (for FTP server) window allows you to configure the following items: The Network - FTP - Client screen, set to “Enable” from Send when sending to FTP server. Also, when sending via proxy server, specify the proxy server setting.
Page 438
Item Description Basic Color Setting Select the color tone to be used. Setting Choices: BW Only, Color or Gray Default: BW Only Resolution Select the resolution of the scanner. Choices: 150 x 150, 300 x 300, 600 x Default: 300 x 300 If “Color Setting”...
Page 439
Item Description E-mail Enable Notification Select whether or not e-mail notifications Notification are to be sent after a transmission to an FTP server is completed. Choices: On, Off Default: E-mail notification is not available when Disable is selected of SMTP in Network - Email - Send Email screen.
Page 440
For SMB server The Scan - Speed Dial Setting of speed dial registration (for SMB server) window allows you to configure the following items: The Network - SMB screen, set to “Enable” from Send when sending to SMB server. For details, refer to “SMB” on page 488. Configuring the Printer...
Page 441
Item Description File Destination Name Specify the name of the destination. Destination Range: Up to 20 characters Default: [Blank] Destination Address Specify the destination IP address of SMB server or NetBIOS. Range: Up to 64 characters Default: [Blank] Directory Specify the destination directory on the SMB server.
Page 442
Item Description Attachment file Select the desired file format. format Choices: TIFF, PDF, JPEG Default: If “Color Setting” is set to “BW Only”, “JPEG” cannot be selected. Coding method Select the coding method. Choices: MH, MR, MMR Default: If “Color Setting” is set to “Color or Gray”, no setting can be selected.
Page 443
Item Description Account Anonymous/Private Select the type of account used for log- Information Site ging into the SMB server. If “Anonymous” is selected, log in with “Anonymous” as the account name and “guest” as the password. If “Private Site” is selected, be sure to specify settings for User Name, Pass- word and Confirm.
Group Dial Setting On the Scan - Group Dial Setting page, settings for group dialing can be specified. Item Description Displays the number in the group dial list. Click a group dial number where no destination is registered to add in the Group Dial Registration page.
Page 445
Group Dial Registration (Destination type) In the Scan - Group Dial Setting - Group Dial Registration window, select the type of group dial destination to be added. Item Description Group Registration From the drop-down list, select the type of group dial destination to be added.
Page 446
Group Dial Registration (Add Destinations) The Scan - Group Dial Setting - Group Dial Registration window allows you to configure the following items: Item Description Group Dial Name Specify the name of the group dial. Range: Up to 20 characters. Default: [Blank] Speed Dial Index...
Page 447
Item Description Speed Dial Displays the list of registered speed dial numbers, 20 at 001-020 a time. Speed Dial Select the check box on the left side of the list to add the 021-040 corresponding speed dial destination to a group dial. Speed Dial 041-060 SMB and FTP destination type cannot be...
Fax Configuration User Data Resistration In the Scan - Fax Configuration - User Data Registration page, user infor- mation can be registered. Item Description User Name Specify the user name. (32 char.) Range: Up to 32 characters Default: [Blank] Configuration Menu Equivalent: UTILITY - ADMIN.
Page 449
Transmission Operation In the Scan - Fax Configuration - Transmission Operation window allows you to configure the following items: Item Description Density Level Specify the density level for fax scanning. Choices: -1, 0, +1 Default: 0 Configuration Menu Equivalent: UTILITY - FAX TX OPERATION - DEN- SITY LEVEL Quality Priority Select the quality setting given priority with fax scanning.
Page 450
Item Description Default TX Select the default transmission mode. Choices: Memory TX, Direct TX Default: Memory TX Configuration Menu Equivalent: UTILITY - FAX TX OPERATION - DEFAULT TX Header Select whether or not the transmission information (date sent, sender's name, fax number, etc.) is printed on sent faxes.
Page 451
Reception Operation In the Scan - Fax Configuration - Reception Operation window allows you to configure the following items: Configuring the Printer...
Page 452
Item Description Memory RX Mode Select whether to allow (“On”) memory reception or not (“Off”). Select On not to print when receiving confidential faxes or when no one is around, for example, at night. The received document can be stored in the memory and printed at a specified time or when memory recep- tion is set to “Off”.
Page 453
Item Description Reduction RX Select whether documents longer than the paper are printed reduced, split, or discarded. If “On” is selected, received faxes are printed reduced. If “Off” is selected, received faxes are printed at full size and split onto multiple pages. If “Cut”...
Page 454
Item Description Forward Address Specify the forwarding address for fax or e-mail. Range: Up to 50 characters (Fax), 64 characters (E-mail) Default: [Blank] Configuration Menu Equivalent: UTILITY - FAX RX OPERATION - FOR- WARD Footer Enable Select whether or not the footer is printed. Choices: On, Off Default: Off Configuration Menu Equivalent:...
Page 455
Communication Setting In the Scan - Fax Configuration - Communication Setting window allow you to configure the following items: Item Description Tone/Pulse Select a tone or pulse dialing mode. If this parameter is not specified correctly, faxes cannot be sent. Choices: Tone, Pulse 10PPS, Pulse 20PPS Default: Tone Configuration Menu Equivalent:...
Page 456
Item Description Line Monitor Vol- Select the volume of the monitoring sound of the trans- mission signal. Choices: High, Low, Off Default: Low Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - COMM. SETTING - LINE MONITOR Even when “Off” is selected, the monitoring sound can be heard when the “On hook”...
Page 457
Reporting In the Scan - Fax Configuration - Reporting window allows you to configure the following items: Item Description Activity Report A report can be printed to show the results of transmis- sion/receptions. Choices: On, Off Default: On Configuration Menu Equivalent: UTILITY - REPORTING - ACTIVITY REPORT Configuring the Printer...
Page 458
Item Description TX Result Report Select whether or not a report showing the results of a transmission is printed automatically after the transmis- sion is finished. If “On” is selected, a report is printed after each trans- mission is finished. If “On (Error)”...
Page 459
User Setting In the Scan - Fax Configuration - User Setting window allows you to config- ure the following items: Item Description Fax PTT Setting Displays the country where this machine is installed. Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - USER SETTING - PTT SETTING Date Format Select the date display format for reports and lists.
Page 460
Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Auto Redial Setting In the Scan - Fax Configuration - Auto Redial Setting window allows you to configure the following items: Item Description Number of Redials Specify the number of redial attempts.
Downloading/Uploading Destination List In the Scan - Downloading/Uploading Destination List window, the desti- nation information can be downloaded or uploaded. Item Description Download Click the Apply button to save the registered destina- tions as a file on the computer being used. Upload Click Browse button to display the dialog box for brows- ing to the folder where the file containing the machine...
Network Page This page allows you to configure network settings. For more information on these protocols, see chapter 9, “Network Printing.” Configuring the Printer...
TCP/IP TCP/IP (shown previous) The Network - TCP/IP - TCP/IP window allows you to configure the following items. For more information on these TCP/IP, see chapter 9, “Network Print- ing.” Item Description TCP/IP Select whether or not to make a connection via TCP/IP. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent:...
Page 464
IPv4 Settings The Network - TCP/IP - IPv4 Settings window allows you to configure the following items. For more information on these TCP/IP, see chapter 9, “Net- work Printing.” Item Description Auto IP Specifies the automatic assigning method for the printer IP address.
Page 465
Item Description IP Address* Sets the printer’s IP address. Range: 0–255 for each xxx triplet Default: 0.0.0.0 If the specified IP address is outside of the allowable range, the value is not changed, even after the Apply button is clicked. The setting returns to the previous value.
Page 466
IPv6 Settings The Network - TCP/IP - IPv6 Settings window allows you to configure the following items. Item Description IPv6 Select whether or not IPv6 is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IPv6 - DISABLE/ ENABLE Configuring the Printer...
Page 467
Item Description IPv6 Auto Setting Select whether or not the IPv6 auto setting is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IPv6 - AUTO SETTING IPv6 Link Local Displays IPv6 Link Local Address. Address Configuration Menu Equivalent: UTILITY - ADMIN.
Page 468
RAW Port Settings The Network - TCP/IP - RAW Port Settings window allows you to configure the following items. Item Description RAW Port Select whether or not RAW port is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - RAW PORT - DISABLE/ENABLE Configuring the Printer...
Page 469
Item Description RAW Port Specify the number of the printer’s RAW port. Number Choices: 1 to 65535 Default: 9100 The currently used port number and numbers 80, 161, 427, 443, 515, 631 and 4567 cannot be specified. RAW Port Select whether or not the RAW Port bidirectional is used. Bidirectional Choices: Enable, Disable Default: Disable...
Page 470
DNS Settings The Network - TCP/IP - DNS Settings window allows you to configure the following items. Item Description Host Name Specifies the host name. Range: Up to 63 characters Default: BHC20-xxxxxx xxxxxx displays six last digits of the MAC address in hexadecimals.
Page 471
Item Description Domain Name Select whether or not the domain name automatic Automatic acquisition is used. Acquisition Choices: Enable, Disable Default: Enable DNS Server Specifies the DNS server. Up to three can be registered. Default: 0.0.0.0 An IPv4 or IPv6 address can be specified. DNS Server Select whether or not the DNS server automatic Automatic...
Page 472
IP Address Filtering The Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations for accessing the printer. The settings described below are not applied to the DNS server and DHCP server. If the range of permitted IP addresses in Access Permission Address overlaps the range of refused IP address in Access Refuse Address, the refuse setting of Access Refuse Address is given pri- ority.
Page 473
Item Description Access Permis- If Enable is selected, the range of IP addresses permitted sion Address access to the printer can be specified. A maximum of five ranges of permitted IP addresses can be specified. In addition, access from an IP address out of the specified range is prohibited.
Page 474
Item Description Access Refuse If Enable is selected, the range of IP addresses refused Address access to the printer can be specified. A maximum of five ranges of refused IP addresses can be specified. If Disable is selected, the refused access setting is disabled.
Page 475
IPsec The Network - TCP/IP - IPsec window allows you to configure the following items. Configuring the Printer...
Page 476
Item Description Generic IPsec Displays whether to enable or disable the IPsec Settings function. IKE Life Time Display the IKE Life Time. IKE Diffie-Hell- Display the IKE Diffie-Hellman Group. man Group IPsec SA Life Display the IPsec SA Life Time. Time Edit icon Click this icon to display the settings page.
Page 477
IPsec (General Settings) The Network - IPsec - General Settings window allows you to configure the following items. Item Description IPsec Select whether to enable or disable the IPsec function. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IPSEC IKE Life Time Specifies the IKE Life Time (in seconds).
Page 478
Item Description IKE Diffie-Hell- Selects IKE Diffie-Hellman Group. man Group Choices: Group1, Group2 Default: Group2 IPsec SA Life Specifies the IPsec SA life Time (in seconds). Time Range: 120-604800 Default: 3600 Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Page 479
IPsec (IKE Settings) The Network - IPsec - IKE Settings window allows you to configure the fol- lowing items. Item Description Displays the number (No.) to be registered. Encryption Algo- Select the encryption algorithm to be used when creating rithm a control tunnel.
Page 480
Item Description Clear button Resets all configuration settings to previous values. Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page. IPsec (IPsec SA Settings) The Network - IPsec - IPsec SA Settings window allows you to configure the following items.
Page 481
Item Description Encryption Algo- When ESP is selected for Security Protocol, specify the rithm for ESP ESP encryption algorithm. Choices: None, DES-CBC, 3DES-CBC, AES-CBC, AES-CTR Default: None Authentication When ESP is selected for Security Protocol, specify the Algorithm for ESP authentication algorithm. Choices: None, MD5, SHA-1 Default: None Authentication...
Page 482
IPsec (IPsec Peer Settings) The Network - IPsec - IPsec Peer Settings window allows you to configure the following items. Item Description Displays the number (No.) to be registered. Perfect Forward To increase the IKE strength, select Use. Secrecy Choices: Not Use, Use Default: Not Use Peer’s Address Specify the IP address of the peer.
Page 483
Item Description Pre-Shared Key Specify the Pre-Shared Key text shared with the peer. Range: Up to 64 characters Default: [Blank] Encapsulation Specify the operation mode of IPsec. Mode Choices: Not Use, Tunnel Mode, Transport Mode Default: Not Use Apply button Applies the configuration settings for this window.
WORK SETTING - BONJOUR Bonjour Name Specify the Bonjour name for the printer. Range: Up to 63 characters Default: KONICA MINOLTA bizhub C20(xx:xx:xx) “xx:xx:xx” refers to the last six digits of the MAC address (in hexadecimal). Priority Protocol Specify the connection protocol given priority with Bonjour.
LDAP In the Network - LDAP window, settings can be specified for the following parameters. Item Description LDAP Select whether or not the LDAP server is used. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - DISABLE/ENABLE Server Address Specify the address of the LDAP server.
Page 486
Item Description Port Number Specify the port number of the LDAP server. Range: 1 to 65535 Default: Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP PORT NO. Enable SSL Select whether SSL is enabled or disabled. Choices: On, Off Default:...
Page 487
Item Description Timeout Specify the maximum wait time during a search. Range: 5 to 300 Default: Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP TIMEOUT Maximum Search Specify the maximum number of destinations displayed Result after a search. Range: 5 to 100 Default:...
Page 488
Item Description Password Specify the password used to connect to the LDAP server. Range: Up to 32 characters Default: [Blank] Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP PASSWORD Domain Name Specify the necessary domain name used to connect to the LDAP server.
The Network - WSD window allows you to configure the following items: Item Description WSD Print Select whether to enable or disable the WSD print function. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - TCP/IP - WSD PRINT Secure Mode Select whether or not WSD communication is performed...
Page 490
Item Description Device Name Displays the Device name. Default: KONICA MINOLTA bizhub C20(xx:xx:xx) Specify the settings from the System - Machine Settings page. Device Location Displays the Device location. Default: [Blank] Specify the settings from the System - Machine Settings page.
NetWare NetWare The Network - NetWare - NetWare window allows you to configure the fol- lowing items Item Description NetWare NetWare Print Enables or Disables the NetWare print option. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - NETWARE Configuring the Printer...
Page 492
Item Description Frame Type Specifies the Frame Type. Choices: Auto, Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP Default: Auto Mode Specifies the NetWare Configuration mode. Choices: Disable, PServer, NPrinter/ RPrinter Default: Disable PServer Print Server Sets the Print Server Name for the printer. Name Range: Up to 63 characters Default: BHC20-xxxxxx...
Page 493
Item Description Preferred NDS Sets the Preferred NDS Context for the Context Name printer. Range: Up to 191 characters Default: [Blank] Preferred NDS Sets the Preferred NDS Tree for the Tree Name printer. Range: Up to 63 characters Default: [Blank] NPrinter/ Printer Name Sets the printer’s name.
Page 494
NetWare Status The Network - NetWare - NetWare Status window allows you to configure the following items: Item Description File Server Identifies current NetWare File Server. Queue Name Identifies current NetWare queue name. Queue Status Identifies current NetWare status. Configuring the Printer...
The Network - IPP window allows you to configure the following items. For details on IPP, refer to chapter 9, “Network Printing.” In order to apply the set- tings, the printer must be turned off, then on again after the setting is speci- fied.
Page 496
Selects whether or not to accept IPP Job. Choices: Enable, Disable Default: Enable Printer Name Displays the printer’s name. Range: Up to 127 characters Default: KONICA MINOLTA bizhub C20(xx:xx:xx) Specify the settings from the System - Machine Settings page. Printer Location Displays the printer’s location.
Page 497
Item Description Operational Print Job If this check box is selected, Print Job is Support enabled. Default: Checked Validate Job If this check box is selected, Validate Job is enabled. Default: Checked Cancel Job If this check box is selected, Cancel Job is enabled.
Page 498
Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer...
Server The Network - FTP - Server window allows you to configure the following items: Item Description FTP Server Enables or Disables the FTP server. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - FTP SERVER Apply button Applies the configuration settings for this window.
Page 500
Client In the Network - FTP - Client window, settings can be specified for the fol- lowing parameters. Item Description Send If Enable is selected, FTP transmission is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NET- WORK SETTING - FTP TX Proxy Server Specify the address when using via proxy server.
Item Description Apply button Applies the configuration settings in this window. Clear button Resets all configuration settings to previous values. SNMP Configuring the Printer...
Page 502
The Network - SNMP window allows you to configure the following items: Item Description SNMP SNMP If Enable is selected, SNMP is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SNMP SNMP v1/ If Enable is selected, SNMP v1/v2c(IP) is enabled.
Page 503
Item Description SNMP v3 Context Specifies the context name. Name Range: Up to 63 characters Default: [Blank] Discovery If Enable is selected, Discovery is enabled. Choices: Enable, Disable Default: Enable Discovery Specifies the user name for detection. User Range: Up to 32 characters Name Default: public Read User...
Page 504
Item Description Write Specifies the security level for reading/writing user. Security Choices: None, Auth-password, Auth-password/ Level Priv-password Default: Auth-password/Priv-password Write Specifies the reading/writing user authentication Auth-pass- password to be used for authentication. word Range: 8 to 32 characters Default: <Mac address> (excluding colons) Write Specifies the reading/writing user privacy password Priv-pass-...
AppleTalk The Network - AppleTalk window allows you to configure the following items: Item Description AppleTalk If Enable is selected, AppleTalk is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - APPLETALK Printer Name Sets the printer name.
Page 507
Be sure to specify an appropriate setting. Default Specify the subject of the E-mail message when Subject using network scanning. Range: Up to 20 chacacters Default: from bizhub C20 Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - DEFAULT SUBJECT Configuring the Printer...
Page 508
Item Description SMTP Specify the IP address or host name for the SMTP Server server. Address Range: Up to 64 characters Default: 0.0.0.0 Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP SERVER ADDR. When specifying a setting for SMTP Server Address, also specify a setting for E-mail Address.
Page 509
Item Description Authenti- If Enable is selected, POP before SMTP is enabled. cation before Choices: Enable, Disable SMTP Default: Disable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - DISABLE/ENABLE Specify the time period to access the SMTP server before after logging in to the POP server.
Page 510
Item Description Port Num- Specify the port number used for communicating with the SMTP server. Range: 1 to 65535 Default: Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3 PORT NO. POP3 Tim- Select the amount of time (in seconds) until the con- eout nection with the POP3 server times out.
Page 511
Item Description Realm If “Digest-MD5” is selected as the SMTP authentica- tion method, specify the realm. Range: Up to 255 characters Default: [Blank] Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings for this window to their user defaults.
In the Network - SMB window, settings can be specified for the following parameters. Item Description Send If Enable is selected, SMB transmission is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NET- WORK SETTING - SMB NTLM Setting Select the version of NTLM Setting.
SSL/TLS SSL/TLS Information The Network - SSL/TLS - SSL/TLS Information page allows you to specify SSL/TLS settings. As a default, SSL/TLS is not installed. Click Setting to create a certifi- cate and specify the SSL settings. Item Description Setting button Displays the SSL/TLS Setting page.
SSL/TLS Setting (When a certificate is not installed) The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol- lowing SSL/TLS settings that appear. Item Description Create a Self-signed Creates a self-signed certificate. Certificate Request a Certificate Creates data for requesting that a certificate to be issued from a certificate authority.
SSL/TLS Setting (When a certificate is installed) The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol- lowing SSL/ TLS settings that appear. Item Description Request a Certificate Creates data for requesting that a certificate be issued from a certificate authority.
Self-signed Certificate Setting The Network - SSL/TLS - Self-signed Certificate Setting page allows you to create a certificate and specify SSL settings. Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is com- prised of “Printer Host Name.
Page 517
Item Description Locality Specify the name of the municipality. Range: Up to 127 characters Default: [Blank] State/Province Specify the name of the state or province. Range: Up to 127 characters Default: [Blank] Country Specify the name of the country as a country code regulated by ISO03166.
Request a certificate The Network - SSL/TLS - Request a Certificate page allows you to config- ure the following items: Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is com- prised of “Printer Host Name.
Page 519
Item Description Locality Specifies the name of the municipality. Range: Up to 127 characters Default: [Blank] State/Province Specifies the name of the state or province. Range: Up to 127 characters Default: [Blank] Country Specify the name of the country as a country code regulated by ISO03166.
Certificate Request The Network - SSL/TLS - Certificate Request page displays the data that will be submitted to the certificate authority to request that a certificate be issued. Item Description Certificate Request Displays the data that should be submitted to the certificate signing authority.
Install a Certificate The Network - SSL/TLS - Install a Certificate page allows you to install the certificate issued by the certificate authority. Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Network - SSL/TLS - Encryp- tion Strength Setting page.
Encryption Strength Setting This menu item appears if a certificate is installed. The Network - SSL/TLS - Encryption Strength Setting page allows you to specify the encryption level. Item Description Encryption Strength Specify the encryption level. Choices: AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits...
Item Description Back button Returns to the previous screen. Cancel button Click to return to the Network - SSL/TLS - SSL/ TLS Information page. Remove a Certificate This menu item appears if a certificate is installed. The Network - SSL/TLS - Remove a Certificate page allows you to delete the installed certificate.
Mode Using SSL/TLS This menu item appears if a certificate is installed. The Network - SSL/TLS - Mode Using SSL/TLS page allows the SSL trans- mission mode to be specified. Item Description Mode using SSL/TLS Selects the SSL transmission mode. Choice: Disable, Enable Default: Disable Apply button...
Authentication User Authentication The Network - Authentication - User Authentication page allows you to specify user authentication settings. This page appears only if an optional hard disk kit or a CompactFlash card is installed. Configuring the Printer...
Page 526
When User Authentication is set to On and Public Access is set to Restrict on this page, printing is not possible except from a host where authentication settings can be specified (Windows printer driver or PageScope Direct Print). In addition, resources (fonts, color profiles and form overlays) can no longer be downloaded and firmware can no longer be updated.
Page 527
Auto Logout Network - Authentication - Auto Logout window allows you to configure the following items. Item Description Admin. Mode Logout Specify the length of time to automatically log off Time from Administrator mode. Range: 1 - 60 (Minutes) Default: 10 User Mode Logout Specify the length of time to automatically log off Time...
Page 528
IEEE802.1x The Network - Authentication - IEEE802.1x window allows you to configure the following items: Item Description IEEE802.1x Select whether to enable or disable the IEEE802.1x function. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IEEE802.1X EAP Type Select the type of authentication used with...
Page 529
Item Description User ID Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification. Range: Up to 128 characters Default: [Blank] Password Specifies the password, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification.
Page 530
Item Description Client Certificate Shows whether or not a client certificate has been specified. Specify the settings from the Network - SSL/ TLS page. CA Certificate Shows whether or not a CA certificate has been specified for CA reliability verification of server cer- tificates.
Page 531
CA Certificate CA Certificate Information The Network - Authentication - CA Certificate - CA Certificate Informa- tion window allows you to specify CA Certificate settings. As a default, CA Certificate is not installed. Click Setting to create a certificate and specify the CA Certificate settings. Item Description Setting button...
Page 532
CA Certificate Setting (When a certificate is installed) The Network - Authentication - CA Certificate - CA Certificate Settings page allows you to select the following CA Certificate settings that appear. Item Description Remove a Certificate Removes the certificate. Next button Click to display the selected page.
Page 533
CA Certificate Setting (When a certificate is not installed) The Network - Authentication - CA Certificate - CA Certificate Settings page allows you to select the following CA Certificate settings that appear. Item Description Install a Certificate Installs the certificate issued by the certificate authority.
Page 534
Install a Certificate The Network - Authentication - CA Certificate - Install a Certificate page allows you to install the certificate issued by the certificate authority. Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Network - Authentication - CA Certificate - Install a Certificate page.
Page 535
Remove a Certificate The Network - Authentication - CA Certificate - Remove a Certificate page allows you to delete the installed certificate. Item Description OK button Click to display a confirmation message. Click OK in the confirmation message to delete the certificate. Back button Click to return to the Network - Authentication - CA Certificate - CA Certificate Setting page.
Page 537
Index Account Mode 287 CA certificate information, Active job list, PageScope Web PageScope Web Connection 507 Connection CA certificate setting, PageScope Print job status 306 Web Connection 509 Administrator Mode 289 Camera Direct settings, PageScope AppleTalk 10, 26, 51, 251 Web Connection 320, 395 AppleTalk, PageScope Web Certificate request, PageScope Web...
Page 538
Camera Direct settings 320, 395 Downloading/Uploading Destination Certificate request 496 List, PageScope Web Downloading/Uploading Destination Connection 437 List 437 Email 482 E-mail destination 409 E-mail, PageScope Encryption strength setting 498 Web Connection 482 Fax Configuration 424 Encryption strength setting, Fax destination 408 PageScope Web Connection 498 FTP 475 Ethernet interface 247...
Page 539
IPv4 settings, PageScope Web Connection 440 Gateway 247 IPv6 253 Manual setting 248 IPv6 settings, PageScope Web General settings, PageScope Web Connection 442 Connection 309, 372 IPX/SPX 254 Group Dial Setting, PageScope Web Connection 420 Job log 345 Job, PageScope Host table 282 Web Connection 306, 368 HTTP 253...
Page 540
PageScope Web Connection Active job list 368 Mac OS X Admin password 355 Options 58 Administrator Mode 289 Page setup settings 62 AppleTalk 481 Print Options 58 Authentication 347, 501 Print settings 65 Auto Logout 503 Printer driver, installing 3 Bonjour 460 Printer driver, uninstalling 62 CA certificate information 507...
Page 541
Login page 287 PCL font, PageScope Web Mode using SSL/TLS 500 Connection 321 Navigation 285 PCL settings, PageScope Web NetWare 467 Connection 314, 382 Online assistance 303, 343 POP Before SMTP 254 Output tray 294, 334 Print Center Paper source 292, 332 AppleTalk 10 Paper source settings 311, 375 Rendezvous 12...
Page 542
Port 9100 254 SNMP 256 SLP 255 SNMP, PageScope SNMP 256 Web Connection 477 TCP/IP 256 Speed Dial Setting, PageScope Web PS font, PageScope Connection 405 Web Connection 322, 397 SSL/TLS information, PageScope PS settings, PageScope Web Web Connection 489 Connection 315, 385 SSL/TLS setting, PageScope Web Pubic User Mode, PageScope Web...
Page 543
Web page, printer 282 Browser 282 Printer name 282 WSD, PageScope Web Connection 465 XPS driver Defaults 130 Options 130 Printer driver settings 134 Printer driver, installing 122 XPS settings, PageScope Web Connection 316, 386 Index...