Konica Minolta bizhub C200 Service Manual page 66

Hide thumbs Also See for bizhub C200:

Table of Contents

Field Service Ver. 2.0 Dec. 2008

C. Reinstall procedure

3. Close the right door.

4. Turn ON the main power switch.

5. Select [Service Mode] → [Imaging Process Adjustment] → [Gradation Adjust] and

carry out gradation adjust.

1. Insert the transfer belt unit [1].

• Insert the transfer belt unit with

care not to allow its docking gear to

be damaged by hitting it against the

rail or associated part.

• Do not touch the surface of the

image transfer belt unit.

• Cover the image transfer belt unit

with something such shade cloth to

protect its surface from dust or for-

eign matter.

A02FF2C009DA

2. Install the transfer belt unit with two

• Replace the ozone filter, which is

supplied with the transfer belt unit,

at the same time.

A02FF2C010DA

3. Periodical check

Chapters

Table of Contents