Management Function Choice - Konica Minolta bizhub C200 Service Manual

12. Billing Setting
12.3.2

Management Function Choice

• To set whether or not the following items are to be mounted.
Key counter, management device or vendor
A. Management Device
Functions • To set whether or not the management device is installed.
Use • Set when the management device is mounted.
• The management device cannot be used together with the key counter.
Setting/ • When setting the mounting of management device, touch [Management Mode] to
Procedure make a management setting.
✽ Management Setting
• Select the Management Setting Mode
Mode 1: Logout with ID key is not allowed.
Mode 2: Logout with ID key is allowed.
B. Key Counter
Functions • To set whether or not the key counter is installed.
Use • Set when the key counter is mounted.
• Select color mode and message when the key counter is mounted.
Setting/ • When setting the mounting of key counter, touch [(Key Counter) Color Mode] and
Procedure [(Key Counter) Message] to set color mode and message.
✽ Color Mode
• When [Mode 1] is set on [Total Counter Mode] after selecting [Billing Setting] →
[Counter setting].
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
• When [Mode 2] is set on [Total Counter Mode] after selecting [Billing Setting] →
[Counter setting] and large size is selected on [Large Size Counter Mode]
Mode 1: 2 counts per 1 copy cycle
Mode 2: 4 counts per 1 copy cycle
Mode 3: 6 counts per 1 copy cycle
Mode 4: 8 counts per 1 copy cycle
Mode 5: 10 counts per 1 copy cycle
• When [Mode 2] is set on [Total Counter Mode] after selecting [Billing Setting] →
[Counter setting] and sizes other than large size are selected on [Large Size Counter
Mode]
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
✽ Message
Setting/
Procedure Select the message type when the administrative unit is mounted.
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
Type 4: Message for remote SW
322
Field Service Ver. 2.0 Dec. 2008