Konica Minolta bizhub C200 Service Manual page 123

6. Other
[1]
[2]
[1]
82
A02EF2C130DA
A02EF2C131DA
[3] [1]
[2]
A02EF2C132DA
Field Service Ver. 2.0 Dec. 2008
7. Remove all the connectors and the
flat cables on the PH relay board.
8. Remove the stopper [1] of the PH
unit.
NOTE
• When removing the stopper, use
care so that both ends of the stop-
per will not open but stay parallel as
shown on the left.
Keep using the stopper after once
stretched out may cause uneven
pitch or other image troubles.
9. Remove two screws [1] and six tabs
[2], and remove the PH relay board
[3].