Konica Minolta bizhub C200 Service Manual page 100

Field Service Ver. 2.0 Dec. 2008
1
[3]
[1]
[2]
9J06F2C575DA
[1]
[2]
9J06F2C576DA
[1]
A02EF2C078DA
7. Remove the PH unit.
Move the front side of the PH unit to
left a little, and remove the boss [1]
from the locating hole [2].
Lift up the front side of the PH unit a
little.
Remove the boss [1] at the rear side
of the PH unit from the locating hole
[2].
NOTE
• Since the back of the PH unit is
pushed to the right with the two
plate springs [3], remove it by tilting
the backside of the PH unit to the
left as shown in the left illustration.
CAUTION
• Be careful not to injure a
hand by the plate springs.
Remove the PH unit [1].
8. Follow the same procedures to
remove all PH units.
6. Other
59
1